BZYP type straight pipe pressure balance compensator

Type straight pipe pressure balance compensator
Type straight pipe pressure balance compensator consists of a bellows and two end connections to form other parts. It absorbs the axial displacement of the pipeline through the flexible deformation of the bellows (there are also a small amount of lateral and angular displacement end pipes or welding directly to the pipe pipes, or welding flanges and then connecting to the pipe flanges. The small tie rods on the expansion joints are mainly It is used as a rigid support during transportation or for pre-deformation adjustment of the product. It is not a load-bearing part. There is a working bellows at both ends of the type straight pipe pressure balance compensator, and there is a balance bellows in the middle. The type straight pipe pressure balance compensator The device uses a force-bearing member (large tie rod or tongue tube) to withstand the internal pressure thrust, so the piping system only needs an intermediate fixed bracket. This type of corrugated expansion joint can only absorb axial displacement
Installation of type straight pipe pressure balance compensator Precautions for use
Pipe pressure balanced corrugated compensators (expansion joints) are generally used on overhead straight pipelines and installed horizontally.
After the pipe pressure balanced corrugated compensators (expansion joints) are installed, all The small tie rod must be removed.
To reduce the elastic reaction force of the bellows expansion joint on the support, this type of bellows expansion joint can be pre-tensioned or pre-pressed before installation (this can be achieved by adjusting the small tie rod on it ).
Design temperature ℃℃ Product code model label bellows type connection type pressure diameter compensation amount/length