Xuzhou Nantong HDPE same-layer drainage P-bend pipe fittings wholesale

Xuzhou Nantong Same-floor Drainage Bend Fittings Wholesale Compared with the traditional interlayer drainage treatment method, the most fundamental change in concept of the same-floor drainage scheme is to completely get rid of the constraints between adjacent floors through the rational layout of pipes on this floor, and avoid A series of troubles and hidden dangers caused by the intrusion of horizontal drainage pipes into the lower space, including unclear property rights, noise interference, hidden dangers of leakage, space limitations, etc. At the same time, using wall-mounted sanitary appliances, there are no longer any sanitary dead corners on the ground, and cleaning Becomes extremely convenient. Same-floor drainage is a novel technology in the bathroom drainage system. The drainage pipes are laid on this floor. A common water-sealed pipe fitting is used to replace many bends and bends. The overall structure is reasonable, so it is not prone to blockage and is easy to clean. With Dredge, users can personalize the location of bathroom sanitary ware according to their own hobbies and wishes.
The advantage is that the property rights of the house are clear and the bathroom drainage pipeline system is arranged in the owner's home on this floor (suite). Pipeline maintenance can be carried out in this (home) without disturbing the residents on the lower floor. . The layout of sanitary ware is not restricted because there are no reserved holes for drainage pipes of sanitary ware on the floor. Users can freely arrange the positions of sanitary ware to meet the personalized requirements of sanitary ware. Developers can provide diversified layout patterns for bathrooms to improve The quality of the house. . Low drainage noise. The drainage pipes are arranged on the floor and covered with backfill cushion to have better sound insulation effect, thus greatly reducing the drainage noise. 2. The probability of water leakage is small. The bathroom floor is not crossed by sanitary equipment pipes, which reduces the probability of water leakage and can also effectively prevent the spread of diseases. , There is no need for the old-style bend or bend. The multi-functional floor drain and the multi-functional water three-way connection of the toilet connector replace the bend or bend set by each sanitary appliance in the traditional down drainage method. Our same-floor installation drainage method can solve all the disadvantages caused by the old bends and bends that cannot be overcome by themselves.
The most fundamental difference is that same-layer drainage does not require old-style bends and old-style water-sealing water bends, while the traditional bottom drainage method requires that each sanitary appliance must be attached with a bend or water-storing water seal. Old-style bends and old traps are the places where clogging is most likely to occur, which is the biggest drawback of the traditional drainage method. Using habitual thinking to look at same-layer drainage is what people don’t understand about same-layer drainage. The second difference is that the horizontal drainage pipes on the same floor are laid in the sleeve of this floor, while the traditional horizontal drainage pipes including its bends and bends are laid on the lower floor through the floor slab, occupying the space in the lower sleeve. The third difference that follows is that once a blockage occurs, the drainage method on the same floor can achieve the purpose of cleaning and dredging within the cover of this layer (uncover the cover of the multi-functional floor drain or connector, while the traditional drainage method must Go to the lower floor to clean and dredge. The fourth difference is that under the traditional drainage method, when the upstairs users use sanitary ware, obvious noise can be heard downstairs, but it is almost impossible to hear it under the drainage method on the same floor.