Fully automatic insulating glass production line (outer joint)

1. Main performance characteristics: , This machine adopts full C control system and touch screen human-machine interface.
. The conveyor section is equipped with an automatic coated glass detection device, which can identify the film surface of the glass
. The cleaning machine is equipped with three pairs of brushes. The first pair of hard brushes can clean ordinary glass, and the last two pairs of brushes are High-temperature nylon filament brush can clean coated glass
. The fan is a high-pressure fan, and is equipped with a soundproof box, heating system and circulating air system.
. The water system is circulating water and equipped with heating device. (Water treatment equipment is optional)
This machine can process double-layer and triple-layer insulating glass, as well as single-sided and left-right staggered insulating glass. The aluminum frame positioning section is equipped with a movable positioning device.
, Can process large and small pieces, curtain wall insulating glass (this function is an internal sheet processing technology, optional)
, The plate press has a center pressing function, and has an opening and inspection function.
, C-type transfer section or flip table type (optional), the transfer section can be connected to an automatic glue line, and the flip table can realize parallel movement of large glass.
, The pressing system of the whole machine is a hydraulic station pressing.
. This machine can process finished glass into sheets per hour based on the * double-layer insulating glass size.
2. Main structural features:
The cleaning section of this machine is a full rubber transmission roller with variable frequency and stepless speed regulation.
, independent brush motor, high-speed oil-free lubricated bearings.
The water spray system is an adjustable nozzle, the water spray shape is fan-shaped, and the angle is adjustable.
The light inspection section, aluminum frame positioning section, outer closing section and positioning beam motor are all controlled by frequency converters to operate at high and low speeds.
The plate pressing movement is of the pull-rod type, and the four-corner gear and rack positioning motion system ensures stable pressing with small errors. C mode controls center positioning and pressing.
, Reversible transmission section, hydraulic cylinder controls the lifting, stable and safe.
3. Technical Parameters
Power supply:
Maximum processing size: * \ *
Minimum processing size: *
Maximum thickness of insulating glass:
Cleaning speed : / (Winter) / (Summer)
Air source pressure: ..
External dimensions: ** Two-component glue coating machine, insulating glass equipment. Butyl glue coating machine