HY type mosaic tile surface renovation treatment agent

Mosaic
Surface tile surface treatment agent


This product is developed for surface treatment of ceramic mosaic
glass mosaic
tiles and other surface treatments. It can be used very well. Prevent the occurrence of mosaic
hollowing
shelling
peeling and cracking of the coating material on the surface of the tiles.
Technical indicators
Serial number

Inspection items

Enterprise standards

Actual measurement results

< br/>
Appearance

Uniform, no lumps, no foreign matter

Uniform, no lumps, no foreign matter



Tensile bond strength,







Shrinkage,


＜





Compression shear bond strength,


(original Strength
)





Pressure shear bond strength,


(water resistance )





Compression shear bonding strength,


(temperature resistance)





Compression shear bond strength,


(freeze-thaw resistance)




Instructions for use

Before construction, the bulging and damaged mosaics or tiles on the base surface should be removed and leveled with cement mortar.

Mix this product with water into a thick paste with a water-cement ratio of about

. Stir thoroughly and leave it for

minutes until the treatment agent becomes After thickening, stir briefly and then use.

Apply the mixed treatment agent on the surface of the mosaic or tiles in batches with a mud board
with a thickness of about

mm
(
/> Not less than
mm

Wait for the surface treatment agent to dry and hard
(
usually
hours
,
depending on It depends on the environmental conditions

You can apply exterior wall paint or paste ceramic tiles
,
The dosage per square meter is about
kg.

Not Be careful not to carry out outdoor construction when it rains.

The working temperature should be above
℃.