HY-22-1 type ceramic tile adhesive

This product is a gray powder, odorless
non-toxic
non-corrosive
non-polluting. It is suitable for pasting various ceramic wall and floor tiles
face tiles, etc. indoors, outdoors and on the floor.

Instructions for use

Before construction, floating dust
oil stains, etc. on the base surface must be removed to avoid affecting the bonding strength.

The construction wall surface should be moist and maintain a certain level of flatness. Uneven or extremely rough areas should be leveled with cement mortar and other materials first.

When using, mix it with water into a thick paste (the water-cement ratio is about
Stir evenly and let it sit for
minutes until the adhesive thickens and you can use it.

Apply the mixed adhesive to the back of the ceramic tile, and then press it firmly until it is flat.

The amount of this product is about

m2 , generally vary depending on the specifications or surface flatness of the tiles.

Notes
This product is not suitable for painting plastic wood boards or metal surfaces.

The construction temperature should be above ℃.

Outdoor construction is not allowed when it rains.

The solidification time varies depending on various factors (for example, high temperature will solidify faster, and vice versa The initial hardening takes about an hour, and the complete hardening takes about an hour.

Packaging and storage
Composite plastic woven bag, / bag.

Store on wooden pallet In the drying warehouse.