Year1
- 产地：
- 山东
- 型号：
- 齐全
- 规格：
- 标准
One point
It is used in mining and stone work projects to drill multi-directional blast holes in medium-hard or hard rocks
It uses a special valveless gas distribution mechanism and The design of high-efficiency rotary reduction mechanism
It is equipped with a muffler device and a rotary drive air motor and its reasonable configuration
The drill frame equipped with the machine
Second level parameters
> Name
Guide rail independent rotary rock drill
Model
Weight
< br/> Impact air consumption
Rotary air consumption
Hole diameter
/>
Hole depth
Drill tail size
,
Work Air pressure
Related accessories
Three uses and maintenance
, use
. The working air pressure should not be lower than the flushing water pressure. It is recommended to be lower than the working air pressure
. In order to ensure normal lubrication during machine operation, lubricating oil and grease should be reasonably selected according to the operating environment temperature.
The following lubricants are available for reference
Model name, freezing point
The pipeline connected to the rock drill must be set with a capacity greater than ( or equal to) liter, an oil injector with adjustable oil supply.
The drilling tools used should meet the quality requirements.
In order to ensure the energy transfer efficiency and the life of the drill rod, the drill tools must be tightly connected when drilling rock.
It is strictly forbidden to operate the rock drill empty for a long time under high pressure.
Maintenance
Normally working rock drills must undergo regular inspection and maintenance to ensure operational reliability.
During maintenance, the gears and bearings should be coated with specified grease.
Before use, check whether each fastener is reliable, and it can only work after it operates normally.
. The water should be shut off before the end of the operation. Run it lightly for a while to drain out the water in the machine before shutting it down to prevent the parts inside the machine from rusting.
If the machine will not be used for a long time, the parts should be disassembled and cleaned before use, and then installed with anti-rust oil. The machine must be stored in a dry place.
Jining Shunyuan Machinery Equipment Co., Ltd. welcomes users to choose our company's products. We will serve you wholeheartedly with high-quality services and low prices. Welcome to call to discuss.
Fax
Telephone
Cell phone
Contact person Wang Meng
WhatsApp
