NJ5048XJH3 mine ambulance

Mine ambulance Mine ambulance configuration:>

In-car process requirements:>

, The whole vehicle body is red color strips>

, The body The words on both sides are mine rescue and the words on the front and rear of the body are emergency rescue

. There are two single seats on each side of the cab>

. Two single seats behind the driver. Each chair should be equipped with a flip-up folding seat>

. Place a ventilator cabinet on the left side of the rear of the car. There are instrument fixing ties and retaining straps in the cabinet, and the cabinet is surrounded by soft blankets>

. Place the ventilator cabinet on the right side of the rear of the car. There are instrument fixing ties and retaining straps inside the cabinet. The cabinet is surrounded by soft blankets>

. Car Make a platform at the top position, install a yellow mine rescue warning light on the platform, and install an alarm at the appropriate position on the instrument panel. >

, install two square strobe lights on the glass on both sides of the rear door, and install switches at appropriate positions on the instrument panel>

, the rear left and right side windows and The rear door window is frosted with frosted film>

, the rear door is a rear double door>

, and the rear entry area is a widened and reinforced rear entry step
>

Technical parameters:>

Overall dimensions length, width and height,**,,,>

Steering type steering wheel emission is based on standard B country, B >

Number of axles, wheel base, number of leaf springs/+,/tire specifications

Wheel base, front/rear|number of tires>

Total quality control Quality,>

Approach angle/departure angle/.Front overhang/rear overhang/,/>

Rated passenger (person) fuel type diesel>

Axle load/maximum speed (/)>

Engine model. Displacement and power>