High temperature masking green tape Green high temperature resistant tape

High Temperature Masking Green Tape Green High Temperature Resistant Tape product introduction uses a base material and silicone adhesive to combine, and has high temperature resistance. It has good viscosity, solvent resistance, strong holding power and no adhesive residue. It is suitable for baking paint spraying and powder spraying of chassis and cabinets for masking and anti-bake protection. It can also be used for electroplating protection of printed circuit boards. It is combined with the base material and masking composite coating silicone adhesive. It has high temperature resistance and is widely used in high-temperature fixing, protection and paint spraying and powder coating of chassis and cabinets. It has good viscosity, high temperature resistance, solvent resistance, strong holding power, and no glue residue. It is suitable for baking paint spraying on cabinets and powder spraying for masking and anti-bake protection.
Basic material + silicone
Basic specifications reservation
Green tape is mainly used for powder spraying, high temperature shielding, gold plating protection, suitable for insulation protection of heat-resistant electrical appliances and electronic transformers, and cannot be used for a long time It is also suitable for use in other occasions that require chemical corrosion resistance and temperature resistance, and is suitable for various types of difficult-to-stick materials.
Smell the smell to see if the sealing tape has a strong sour smell. If it does, it is made of inferior glue, and this is inferior tape.
Use the naked eye to look at the material to see if it is very yellow. This material is poor. Generally light yellow and white are better.
Characteristics include high temperature resistance, conformable adhesion, solvent resistance, powder coating, masking, and gold plating protection
Green tape maintenance methods
The tape should be stored in the warehouse to avoid sunlight and rain. It is forbidden to come into contact with acid, alkali, oil and organic solvents, keep it clean and dry, away from the discovery device, and the room temperature is between ℃ ~ ℃.
The tape should be placed in a roll without folding. If stored for a long time, it should be turned once a quarter.
When loading and unloading the conveyor belt, it is best to use a crane and use rigging with beams to lift it smoothly to avoid damaging the belt edges. Do not load and unload the conveyor belt arbitrarily, which may cause loose coiling and throwing.
The type and specifications of the tape should be selected reasonably according to the use needs and specific conditions.
Tape tapes of different varieties, specifications, models, strengths, and layers of cloth must not be connected (matched) used together.
It is best to use hot vulcanization glue for conveyor belt joints to improve reliability and maintain high effective strength.
The diameter of the conveyor's transmission roller and the minimum pulley diameter of the conveyor belt should comply with relevant regulations.
Do not let the tape snake or creep. Keep the drag roller and vertical roller flexible, and the tension should be moderate.
When the conveyor is equipped with baffles and cleaning devices, wear and tear on the tape should be avoided.
Cleanliness is the basic condition for the good operation of the tape. Foreign substances will affect the tape's eccentricity, tension difference, and even breakage.
When early damage to the tape is found during use, the cause should be found and repaired in time to avoid adverse consequences.
Gold-plated protective high-temperature tape powder spray masking tape
Product details
High-temperature resistant green tape is mainly used for masking and protection of spray paint electroplating, temperature resistance, time is minutes, actual temperature resistance. Acid and alkali resistant, corrosion resistant, high pressure resistant, no glue residue.
Product Usage: Masking, protection and insulation during high-temperature spraying of coating and other products. No residual glue will be left after production. During the production of printed circuit boards, electronic parts, resistors and capacitors, high-temperature spray paint protection and high-temperature binding and fixation are required for fixing household appliances, machinery, electronics and other industries. Protect the gold finger part of the circuit board during wave soldering, reflow soldering or soldering.
The commonly used specifications include length, maximum width (can be cut) and thickness. The material is high-temperature polyester film.
Color green, red, black, transparent
Glue type silicone