Concrete pavement row vibrator

产地：

山东

型号：

齐全

规格：

标准

Concrete pavement row vibrator
Concrete pavement row vibrator Concrete pavement row vibrator price Concrete pavement row vibrator Where to find Jining Shunyuan to make you regret it
Jining Shunyuan Machinery is a manufacturer specializing in the production of row vibrators for concrete pavements in Shandong Province. It has been producing row vibrators for many years. It has developed more than 20 types of row vibrators and other road construction and maintenance machines and has been widely sold. It is used all over the country and is used in the construction of various high-grade highways, and is well received by users.
The price is subject to telephone quotation
1. Use of row vibrator for concrete pavement
Row vibrator is used in the construction of cement concrete pavement to achieve deep penetration in the paving process of cement concrete pavement. Vibration. This machine can be used with the cement concrete paving and leveling machine of our factory. Before using the leveling machine, it is mainly used for vibrating and smoothing the road surface, which can improve the quality of the road surface and work efficiency.
Main technical parameters of secondary concrete pavement row vibrator
> Maximum depth of vibrator



Walking speed



Dimensions

Length

Traveling motor power



Single vibrator Power



Power of row lifter



3. Use and adjustment of concrete pavement row vibrator
Before use, adjust and connect the cables, add a leakage switch in front of the electric control box, and adjust the forward and reverse directions of the travel switch and the forward and reverse directions of the lifting motor. At the same time, you must ensure that the direction of the vibrator is correct.
When using this machine, you should first lower the vibrator onto the solid material, and then turn on the vibrator switch. (Note that if there is a dead rod, it should be knocked in time and should not be dead for a long time. Otherwise, the vibration motor will be damaged) As the rod vibrates, continue to lower the wire rope downwards so that it is completely inserted into the concrete. Then turn on the walking system, walk forward, and start working.
. Every time the vibrator rod is lifted during operation, the vibrator rod should be stopped and the vibrator motor should be started again after the cement is inserted. It is not allowed to vibrate after the vibrator is lifted away from the cement concrete.
. If the machine encounters deviation during operation, attention should be paid to adjusting the deviation to prevent the forward roller from detaching from the guide rail and affecting normal construction.
. The deviation adjustment method is on the electric control box. Disconnect the front-end traveling motor so that the rear-end can travel forward normally and adjust the whole machine. After adjustment, the power supply to the traveling motor at the disconnected end should be restored, so that the traveling motors at both ends can run synchronously, that is, it can operate normally.
4. Maintenance, repair and safety of concrete pavement row vibrator
Before using the machine, check whether the traveling reducer is filled with enough lubricating oil. If not, add enough lubricating oil before use. Oil.
. Frequently check the tightness of the walking system chain during use. If it is too loose, it should be adjusted to avoid affecting normal use.
When the machine is operating, operators should pay attention to safety in front of the machine and within the operating range. No one should stay in places with unsafe factors.
Before using the machine for each shift, you should check whether the power supply cable is correctly connected to the machine and whether it is worn or leaked. If any, it should be repaired in time. Operation with a disease is not allowed.
Jining Shunyuan Machinery Equipment Co., Ltd.
Contact person Wang Meng
Telephone
Mobile phone