Complete models of bell mouth guide trough, rectangular mouth guide trough, wholesale guide trough purchasing manufacturer

The guide trough can be divided into a type with an anti-overflow skirt and a fully enclosed type. If it is a fully sealed type, it consists of upper, middle and lower parts. The middle side plate is connected to the conveyor frame and is a fixed part. The cover and lower bottom plate are connected to the side plates through bolts and can be easily disassembled for installation and maintenance.
The width of the bottom edge of the guide trough is the bandwidth
The cross-sectional shape of the guide trough is divided into two types: rectangular and arc.
The design of the guide trough is divided into three parts: the back baffle, the trough body, and the front curtain.
The guide trough can be customized according to the specific requirements of the customer, and can be divided into sections. For example, the meter guide trough can be divided into sections, each section is meters, and each section uses an outrigger.
The front and rear ends of the guide trough designed by Yanshan Tongtai Machinery Manufacturing Co., Ltd. are equipped with multiple sealing baffles and curtains to form a pressure-equalizing dust sealing and dust reduction system, so that the dust can be depressurized, decelerated, and settled, making the dust more dense. Clean air flows out from the outlet of the guide chute. The entire guide trough forms a closed structure. When the dust vortex creates impact wind pressure on the guide trough, the dust will never overflow and spread.
Under the conveyor belt, replace the original trough-type roller set with a short-trough type roller set to support the material gravity part of the conveyor belt. The non-gravity parts on both sides of the conveyor belt are supported by bottom plates with friction-reducing and wear-resistant materials, which not only support the conveyor belt but also serve as a seal. This support bottom plate is connected to the side plates, and the side plates are connected to the top plate. Together they form a shell seal structure.