Computer fully automatic EPS laminating machine assembly line

The foam composite tile press can produce roof panels with various appearances according to production needs, and has a high yield.

In the production of tile machines, it is strictly prohibited to work beyond the minimum closing height, that is, the minimum distance mm from the bottom of the upper sliding box to each working surface requires the height after the upper and lower molds are closed plus the thick bottom of the upper and lower backing plates plus the tiles The thickness of the blank is not allowed to exceed mm. The mold should be designed according to this requirement to avoid machine tool accidents. Always pay attention to the level of lubricating oil in the sliding box and both sides of the machine. The tile press is mainly composed of left and right bodies, bottom connecting rod, top chassis cover, sliding seat, hexagonal runner, pulley, gear mechanism, sheave mechanism, cam mechanism, lubrication pump, oil system, electronic control part, etc. The equipment should be wiped frequently to keep it clean and free from mud and water.

In the stamping process of the upper die of the machine, the motor drives the input shaft through the pulley, through the small gear and the large gear, drives the upper shaft, and drives the sliding seat equipped with the upper die to move up and down through a set of cam mechanism to achieve pressing. watt. The indexing positioning of the workbench is achieved by a gear set installed at the end of the upper shaft, a driving pin gear, and a sheave wheel installed on the hexagonal runner shaft to achieve indexing positioning. There is an and The return cam, which is mounted on the same axis and is conjugate to the pressing cam, achieves precise positioning of the lower mold in the working position through the positioning rod and positioning plate