Yatai outer sealing steel grid double body guide rail hydraulic lifting freight elevator

Exterior-sealed steel grid double-body guide rail hydraulic lifting freight elevator
Introduction is mainly used for high-altitude cargo transportation between floors. It is mainly used in environments with light load capacity and relatively small table size requirements. The rail-type lifting platform can be installed indoors and outdoors at a height of 3 meters. It is also called a hydraulic hoist. It has a high lifting height and uses a side cylinder. It operates smoothly, has low noise and is easy to maintain. Longer service life.
Features
When there is a power outage, manual emergency descent can be used, which is safe, convenient, fast and practical
The depth of the pit is generally 100, and the height of the top floor is not limited. It can be customized according to the on-site environment
Suitable floor Steel structure or concrete factory buildings can be used both inside and outside
The pump station adopts a joint venture pump station and a pump station imported from Italy. If the speed requirement is too high, a joint venture customized pump station can be used to achieve ideal delivery requirements.
The oil cylinder and seals use imported parts to solve the problem of unstable oil pressure and oil leakage of parts for customers.
The oil cylinder is built into the platform
Heavy-duty wire rope pulley or weighted special chain ensures safety
During the ascent process The automatic insurance ensures the safety of the vehicle
The synchronization device during the ascent ensures that the vehicle does not overturn
The alarm setting before descending to the ground ensures the safety of the operator
The chain or wire rope breakage protection device
Hydraulic The system's pressure loss and explosion-proof protection device uses a special leveling permanent magnet switch for elevators, which has good leveling effect.
The distance between heavy load and no-load is small, and the leveling accuracy is high and easy to adjust.
The standard elevator control panel LCD display call box related wiring harness and connectors are selected. It has a beautiful appearance and is easy to operate. It visually displays the floor location of the car. The wiring harness is connected by connectors. There are automatic and manual controls.
Safe control of voltage
Select rolling guide shoes with high precision, wear resistance and smooth lifting.
Shaft Advantages
With external protection, the hydraulic lift freight elevator does not require a machine room above the shaft.
No counterweight device is installed to improve the utilization rate of the hoistway area.
The load of the hydraulic lifting freight elevator with external protection is directly applied to the foundation pit through the oil cylinder. The strength requirements of the shaft are low, and the brick structure or brick-concrete structure shaft is sufficient.
Safety and Stability Advantages
The relief valve can prevent the system pressure from being too high during upward movement.
When the power supply of the emergency manual valve fails, the elevator can be lowered to the nearest floor to open the door in an emergency.
Pipe rupture valve When the hydraulic system pipeline ruptures and the elevator stalls and descends, it can automatically cut off the oil line to stop the descent.
Fuel tank oil temperature protection When the oil temperature in the fuel tank exceeds the standard set value, the oil temperature protection device generates a signal and suspends the use of the elevator. When the oil temperature drops, the elevator can be started.
Low failure rate Due to the use of advanced hydraulic systems and good control methods, the failure rate of the elevator can be minimized.
Low power consumption When the hydraulic lift goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.