Year1
- 型号：
- Q326 、Q3210 、QR3210
- 用途：
- 该系列适用于各种中、小型铸件、锻件及机加工件的表面清理、除锈以及抛丸强化工艺。它适用于不同的生产规模，既可单机使用，也可多台联用，与连续输送器等配套组成生产清理流水线。是大、中、小型清理工件的理想清理
- 特点：
- 1．Q32履带式抛丸清理机采用了悬臂离心式抛丸器，具有使用寿命长和结构简单等特点。 2．Q32履带式抛丸清理机采用BE型分离器，具有良好的分离效果和较高的生产率，对提高叶片有积极的作用。
/ [中]Company panorama
瀹嬩綋 Product specifications
瀹嬩綋
瀹嬩綋 Product category shot blasting machinery track Shot blasting machine
瀹嬩綋
瀹嬩綋瀹嬩綋parameters
瀹嬩綋unit
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋 Productivity
瀹嬩綋
瀹嬩綋br/>
瀹嬩綋br/>
瀹嬩綋br/>
瀹嬩綋 Adding quantity
瀹嬩綋
瀹嬩綋
瀹嬩狋
瀹嬩綋
瀹嬩綋Maximum weight of a single piece
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩狋
瀹嬩綋end plate diameter
瀹嬩綋
瀹嬩綋Ф
瀹嬩綋Ф
瀹嬩綋Ф
瀹嬩綋effective volume
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋 Shot blasting volume
瀹嬩綋
瀹嬩狋
瀹嬩狋
瀹嬩綋
瀹嬩綋dust removal air volume
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋
瀹嬩綋 Product Introduction This series is suitable for various small and medium-sized castings Surface cleaning and rust removal of forgings and machined parts as well as shot blasting strengthening process. It is suitable for different production scales. It can be used as a single machine or in combination with multiple machines. It can be used with continuous conveyors to form a production and cleaning assembly line. It is an ideal cleaning equipment for cleaning large, medium and small workpieces. The series of crawler shot blasting machines have the advantages of advanced design, reasonable structure, low energy consumption and high efficiency.
This machine is a new product designed and developed by integrating domestic and foreign technologies. It is a cleaning equipment with high cleaning efficiency, compact structure, low noise and good completeness. The machine has the following characteristics
The belt shot blasting machine uses a cantilever centrifugal shot blaster, which has the characteristics of long service life and simple structure.
The belt-type shot blasting machine adopts a type separator, which has good separation effect and high productivity, and has a positive effect on improving the blades.
The belt-type shot blasting machine uses a bag dust collector, and the dust emission concentration is lower than the national standards, which greatly improves the operator's working environment.
The belt-type shot blasting machine adopts wear-resistant rubber tracks, which reduces the collision and damage to the workpiece and reduces the noise of the machine.
The 瀹嬩狋 series is made of high-strength wear-resistant rubber tracks or manganese steel tracks to load workpieces. The shot blaster throws high-speed projectiles to the overturned workpieces on the tracks to achieve the purpose of cleaning. It is mainly suitable for cleaning small and medium-sized workpieces such as castings, forgings, aluminum parts, stainless steel parts, and copper parts. The layout of the shot blasting chamber and the shot blaster are determined by computer three-dimensional dynamic projection simulation, so that the coverage area of the thrown projectile flow accurately covers the surface of the workpiece, and the surface of the workpiece is thrown from all directions of the workpiece at the same time. Grinding steel rubber tracks reduce collision damage to workpieces and reduce machine noise. The air selection separator is used, which has good separation effect and high productivity, and reduces the wear of wear-resistant parts such as shot blaster blades. The bag dust collector is used, and the dust emission concentration is lower than the national standards, which improves the work efficiency of workers. After the workpieces in the working environment are cleaned, the crawler belt can be reversed to realize automatic unloading. The popular pitless form is adopted, which saves the construction cost of pit foundation.
This machine is suitable for surface rust removal or shot blasting strengthening of various types of large and medium-volume production workpieces. The workpieces to be cleaned must be castings and heat-treated parts with a single weight of less than 10% that are not afraid of collision. The crawler shot blasting machine produced has the following advantages
Zhenjie adopts the German company’s high projectile speed cantilever centrifugal shot blasting technology. It can significantly improve the cleaning efficiency and obtain satisfactory cleaning quality. It has the characteristics of long service life, simple structure and low failure rate.
瀹嬩綋
The layout of the shot blasting chamber and shot blaster is determined by computer three-dimensional dynamic projection simulation, so that the coverage area of the thrown projectile flow accurately covers the surface of the workpiece, and the projectile passes from the surface of the workpiece Throwing it at the surface of the workpiece in all directions at the same time ensures that no dead ends are left after the workpiece is processed.
The machine adopts wear-resistant steel-clamped rubber tracks, which reduces collision damage to workpieces. The machine noise and vibration are small. The dust collector can be bag type or cyclone dust collector, and the dust concentration reaches national safety standards. Standard, reduce machine friction and increase service life.
瀹嬩磋 products have a high level of automation, save manpower, and adopt a hole-free mode to reduce corporate expenses
瀹嬩磋 This type of shot blasting machine is mainly used for surface treatment of workpieces produced in large and medium batches of various varieties For rust removal or shot blasting, this machine uses a high-speed rotating impeller to throw projectiles onto the continuously turning workpieces in the drum to achieve the purpose of cleaning. It is suitable for shot blasting, rust removal, scale removal and surface strengthening of small castings, forgings, stampings, etc. in various industries. It is especially suitable for surface cleaning and strengthening of parts that are not afraid of collision. The castings have been shot blasted, and the machined surface is convenient for the next machining process. It not only saves processing time, but also protects machine tools and cutting tools from damage. After the non-machined surface is painted, it will last for a long time, improving the service life and appearance quality of the product.
This machine uses an annular rubber track to form a working space. The workpiece to be cleaned is continuously turned over under the drive of the rotating track. The projectiles are thrown towards the continuously rolling workpiece on the track at high speed under the action of the centrifugal force of the shot blaster. , to achieve the purpose of cleaning. This machine is suitable for sand cleaning, rust removal, scale removal and surface strengthening of small and medium-sized castings, forgings, stamping parts and gear springs in various industries. It adopts tipping bucket automatic feeding and crawler rotating automatic unloading, which greatly reduces the labor intensity of workers. The new bag dust collector makes the dust emission concentration lower than the national emission standards and improves working conditions.
/ International Exchange
WhatsApp
