Year1
- 邵氏硬度：
- 大于80
- 光泽度：
- 大于90%
- 耐磨度g：
- 小于0.01
In 2017, the Xilide brand was awarded the title of Dalian Famous Trademark.
Anti-static floor paint, the surface resistance of the paint film is ohms, giving priority to preventing the leakage of electrostatic charges and eliminating the hazards of static electricity accumulation and electromagnetic interference. Epoxy anti-static floor has all the excellent properties of epoxy resin floor. It can quickly discharge electrostatic charge and has long-lasting anti-static effect. The surface resistivity reaches the ground resistance discharge and meets international standards. The floor is seamless as a whole and can achieve the purpose of being dustproof, tough, wear-resistant, impact-resistant, heavy-pressure-resistant, corrosion-resistant, solvent-resistant, smooth, brightly colored, easy to clean and maintain, and has a long service life.
Ground treatment should be polished, repaired, decontaminated and dusted according to the ground conditions
The anti-static primer is made of anti-static primer with extremely strong permeability and adhesion.
One coat of anti-static primer is used to enhance surface adhesion
Lay the copper foil with conductive copper foil across the board, and lay the copper foil at intervals horizontally and vertically for anti-static
Add the anti-static component to quartz sand into the mortar, and use a scraper to evenly coat the floor
Anti-static The floor is suitable for electronics, microelectronics, communications, computers, precision instruments, textiles, original Qingxi, not downloaded online. Printing, powder, chemical, organic solvent, gas and other factories that require anti-static walls, floors and oil storage tanks.
Anti-static floor paint is a product of high value, high quality and high requirements. Correct use can keep the floor looking like new and extend its service life. Specific suggestions are as follows
Anti-static floor paint maintenance suggestions
After the floor construction is completed, it needs to be cured before it can be put into use. During the curing period, water or other solutions should be avoided from infiltrating the surface
Anyone entering the workshop Employees must change to rubber-soled shoes and cannot wear black-soled shoes with foam soles to avoid bringing mud and sand from outside into the workshop and scratching the floor
Any hardware such as iron chairs, iron tables, iron shelves, etc. Wrap it with soft plastic rubber or pad it with paper to avoid scratching the ground during use
The tractor needs to fully lift the machine board off the ground. When turning, please pay special attention to the corners of the machine board to avoid scratching the ground
When cleaning the floor, please use a soft mop with good water absorption or a wet and dry vacuum cleaner. It can be cleaned with water or detergent, but please note that the floor is slippery
If there is small wear or scratches due to long use, The area can be partially repaired. If the area is large, it is recommended to re-roll it.
Before the equipment enters the factory, lay a cardboard box on the floor to avoid scratching the floor during the transportation of the equipment
Reference suggestions
In the case of simultaneous production and construction, the construction environment must have sufficient isolation areas to prevent gray sand particles from penetrating into the wet paint film epoxy floor
Areas that are easily contaminated, and more conspicuous facade areas , walkers should clean it with a wide cloth mop once a day
If there is coarse and hard sand and mud on the ground, it should be swept away in time to avoid the sand grinding the ground and reducing ground wear
Employees should change to soft-soled shoes before entering the clean area Set up plastic blankets at the entrances and exits where sand and mud are easily brought in to facilitate employees to remove debris from the soles when entering and exiting[]
The company's main products include epoxy floor series coatings, anti-static coatings, waterproof and environmentally friendly coatings, anti-corrosion coatings, sealing and curing agents Dry powder building materials, wall coatings, metal non-metallic cement floor hardener materials, etc.
Xilide Technology Co., Ltd.
was founded in
and is located in the beautiful coastal city of Dalian. After years of hard work, it has developed into a large scale and is mainly engaged in the research, development, production and sales of new special building materials products. Comprehensive business such as technical service engineering supporting construction, etc., passed the international quality system certification in 2018, and was rated as a green and environmentally friendly building materials production and construction enterprise by the National Building Materials Association. It is an independent legal person approved by the Ministry of Construction. It is a national second-level enterprise in building decoration and decoration. At present, the main products include epoxy floor series coatings, anti-static coatings, anti-corrosion coatings, dry powder building materials, wall coatings, waterproof coatings, coils, etc. The annual comprehensive production capacity can reach
tons, and the products have been marketed to many domestic countries
The export volume of provinces, cities, regions and municipalities to foreign countries has also increased year by year. The company uses a large number of advanced construction equipment from Germany, Japan, the United States and other countries, which can meet the construction needs of 10,000 square meters of floor at the same time. It has successively provided products for Shenyang Jinbei, Qingdao Aucma, Japan Yoshida Zipper, Changchun FAW, Dalian Wazhao, Jiangyin Furen, Inner Mongolia Mengniu Group, etc. It is widely used by customers and is highly praised by the industry and customers.
WhatsApp
