How to avoid efflorescence in Jinzhong City’s emery wear-resistant floor materials

< : : >How to avoid efflorescence of Jinzhong City's emery wear-resistant floor materials
Keywords: Wear-resistant floor construction, how to prevent wear-resistant floor cracking, emery wear-resistant flooring, emery-resistant Abrasives
What are the reasons for cracking of wear-resistant floors after construction
Due to shrinkage problems, material problems and uneven sinking of buildings due to concrete foundation reasons, the ground will crack, manifesting as long strips of cracks.
The hollow part of the ground is under pressure, and then cracks in all directions, appearing like an explosion.
The cracks in the surface layer are mainly due to the quality of materials or insufficient maintenance during the construction of wear-resistant flooring.
So how to prevent wear-resistant flooring from cracking during construction?
, The ground must be moistened in advance during construction
, The condensation layer must be processed in place (concrete emery wear-resistant powder manufacturer phone number: )
, The slump of cement mortar or concrete should not be too large, too large It is easy to form shrinkage cracks
. Do not leave shrinkage joints exceeding 1 meter, otherwise there will be more cracks
. It is best to cut the expansion joints later
. Pay attention to moisturizing and maintenance during the construction process
/> , reserve expansion joints and be careful to prevent hollowing of the expansion joints
The construction of emery wear-resistant flooring is very simple. You only need to sprinkle emery abrasion-resistant material during the initial setting period of the concrete to form a dense, wear-resistant layer. The colorful emery floor can be put into use after reaching the drying period, greatly shortening the construction period.
Compared with other epoxy floors, the cost of emery wear-resistant floors is slightly lower, which is the biggest advantage for some small and medium-sized enterprises. Many enterprises do not have much capital to invest in the ground. Choosing emery colored floor is undoubtedly the most economical and practical.
Some manufacturers still use traditional concrete floors, which have a short service life and are unsightly. Nowadays, many manufacturers use colors to divide production areas. They have the most popular emery wear-resistant flooring among consumers, which adds color to the company and life.
Liu Lulu:
:
Address: No. Qizhou Road, Huaiyin District, Jinan City
Website::.cc
:..
Step Li also has a WeChat public account. Please search the Staple Voice r official account to obtain the latest knowledge and information on the flooring industry. Everyone is welcome to pay attention!