Shenzhen Henghui stainless steel range hood anti-oil coating/anti-fingerprint/easy to clean

Introduction to the anti-oil stain and anti-fingerprint coating of stainless steel range hoods
The anti-oil stain and anti-fingerprint coating of stainless steel range hoods provides reliable high-transparent paint sealing technology for the stainless steel plate surface of range hoods. It uses the action of high molecular polymers to seal the stainless steel An isolation layer is formed on the surface. This isolation layer has the functions of resisting ultraviolet rays, oil stains, and hydrophobicity. It is specially designed to effectively and permanently protect the surface of the stainless steel range hood from oil, water, and fingerprints. It is also resistant to high temperatures, thereby maintaining the stainless steel range hood for a long time. The surface is clean and oil-free and easy to clean.
Product Features
The scratch-resistant stainless steel range hood has an oil-resistant coating with a high hardness. Compared with the hardness of ordinary paint, it can prevent most minor scratches and has its own elastic recovery function to protect stainless steel. Protected from minor everyday scratches.
The corrosion-resistant stainless steel range hood's anti-oil coating isolates the stainless steel from the outside world and can effectively prevent oxidation, oil stains, soy sauce, edible oil, and corrosion from Mr. Whammy.
Non-cracking stainless steel range hood’s anti-greasy coating is resistant to ultraviolet rays, high temperature and severe cold, and has a temperature resistance range of ℃ to ℃. It can adapt to a wide range of temperature changes and will not crack or fall off.
Easy to clean the stainless steel range hood. The powerful fiber mesh with anti-oil coating will fill the invisible tiny pores on the stainless steel surface, making the stainless steel surface reach a mirror-like state, making the stainless steel surface easy to clean and maintain. All kinds of dust and dirt will only By rinsing with clean water without adding any detergent, the stainless steel surface can be restored and maintained crystal clear. Even if there is oil stains, it can be easily removed by simply wiping the surface of the object with a wet towel.
The anti-oil stain coating of anti-static stainless steel range hood contains anti-static agent, which is not easy to absorb dust during construction and does not require too high requirements on the construction environment.
Long-lasting stainless steel range hood has a long oil-resistant coating, long-lasting and stable performance, and can be used for up to years.
The advanced paint protection technology of the anti-greasy coating of the super value-preserved stainless steel range hood not only reduces the cost of cleaning agents, but also makes the stainless steel surface of the range hood better protected and hygienic
How to use
Spraying The environment should be purified and equipped with good air supply and exhaust devices. Construction and storage should not be carried out in an environment with flying dust
The gas generated by the air compressor should be effectively treated such as oil and water separation to ensure the quality of spraying gas
It is recommended to use a spray gun with a caliber on the left and right, and it should be cleaned after the construction is completed. The surface of the workpiece to be coated should be dry and flat, free of oil, rust, oxide layer, dust, etc.
Use at room temperature with a spraying diameter smaller than that of soaking and smearing. It is necessary to ensure that the metal surface is evenly covered with a protective film.
Depending on the actual situation, spraying or brushing methods can be used. The thickness of the film layer varies, approx. When painting, the environment must be dry and clean, and paint mist must be removed in time to avoid dust and paint mist flying. When adjusting the spray gun, pay attention to the small amount of oil output, the air pressure is about kilograms, the gun caliber anti-fingerprint oil is a nano-coating, the resin is fine, the film is fast, the film is thin, and it is not easy to apply thickly, so the paint output of the gun must be adjusted small, do Apply in thin sprays.
This product is a flammable, explosive and volatile substance. Safety and fire prevention measures should be installed in production and construction sites. Operators must strictly abide by safety and fire prevention systems and do a good job of labor protection during operation.
Product packaging specifications/barrel