Gaowang alcohol-based fuel infrared induction accessories 2015 latest quotation

Infrared electronic ignition energy-saving alcohol-based frying stove practical instructions Infrared electronic ignition alcohol-based frying stove uses alcohol-based methanol as the main raw material. Environmentally friendly, energy-saving, smoke-free and non-toxic, it complies with national environmental protection requirements and is widely used in restaurants, hotels, schools and other places. This stove automatically ignites, and the firepower can be adjusted freely. When the pot is on the stove, the burning pot will be extinguished. It has an electronic sensor anti-air burn function, which solves the safety hazards of fuel leakage in the stove core and accidental courtship. It is more economical than the original Fuel, extremely easy to use.
First installation method
Connect the fan power cord.
Connect one end of the oil pipe to the oil input end of the single frying furnace, and put the other end into the oil tank.
Second-use method
Open the fuel tank ball valve switch, and the fuel will flow into the oil pipe freely.
The oil control switch needs to be turned to half position/also the air valve switch in front of the panel to the middle.
Start the power, put the pot into the stove ring, and after the ignition is successful, turn on the fan to the maximum, adjust the fire power to the required fire power, and it can be used normally after adjusting the fire power to the required power. The pot will be removed from the fire and the fan will be powered on immediately. Turn it off to avoid air raid burn.
When finished using, turn off the power, then close the oil valve to the minimum, and finally close the damper to the middle.
Turn off the fuel valve switch to avoid accidental fuel leakage.
Triple Tips
The oil tank should be installed away from fire sources, with air circulation and sunlight not directly shining above the stove.
Remember to stay away from fireworks when adding fuel.
After use, the oil pipe ball valve switch should be closed, and the oil tank pipeline switch should be checked frequently for oil leakage.
There is too much oil left in the stove core, the liquid level is immersed in the ignition needle, and the oil valve is in a closed state. If you ignite first and then open the oil valve, it will cause difficulty in ignition or failure to ignite. It should be burned out by manual ignition. If there is residual oil in the stove core, ignite according to normal procedures.
When the stove core is ignited, high pressure will be generated. Accidents may occur if it is not disassembled or operated in accordance with regulations, or if it is changed for use
!
The price of an infrared single frying stove is RMB/set, an ordinary single frying stove is RMB/set
Infrared single frying single tail stove is RMB/set, an ordinary single frying stove is RMB/set
Infrared double frying single tail Furnace unit/set Ordinary double-fried single-tail furnace unit/set
Infrared accessories unit/set of burner head ignition needle solenoid valve controller receiving head transmitter head
Shipping/contact address Jiahe, Baiyun District, Guangzhou City, Guangdong Province The first floor of the building in Wanggang Yayuan Industrial Zone
Jiaolonggang Seaside Hotel Building, Shuangliu County, Chengdu City, Sichuan Province