Hunan Liyang brand dehydrator

Overview of solid-liquid separation dehydration machine Specializing in the production of solid-liquid separation dehydration machine With the improvement of living standards, people's demand for meat is increasing. Therefore, animal husbandry is like raising chickens, and more and more ducks are being raised. But what to use to deal with livestock and poultry manure? In fact, the method is not difficult, just use a solid-liquid separation dehydrator.
Solid-liquid separation and dehydration machines are widely used in livestock and poultry farms for solid-liquid separation and dehydration of livestock and poultry manure, chicken manure, duck manure, pig manure, cow manure, etc. The dehydrator is mainly made of stainless steel filter, stainless steel spiral auger, stainless steel spiral blades, which are made of high-quality stainless steel through a special process and are corrosion-resistant and wear-resistant. The spiral extrusion type continuous solid-liquid separation treatment machine produced by our Liyang Company uses filters of equal pore size for filtration.
The working principle of Liyang brand solid-liquid separation dehydrator
First, the non-clogging submersible pump matched with the dehydrator lifts the livestock and poultry manure and dung water into the solid-liquid separation dehydrator, and then the auger will The livestock and poultry manure and manure are gradually pushed to the front of the machine, and at the same time, the pressure on the front edge of the machine is continuously increased, forcing the moisture in the material to squeeze out of the mesh screen under the action of the side pressure belt filter and flow out of the drainage pipe.
The work of the solid-liquid separation dehydrator is continuous. It continuously lifts the livestock and poultry manure and water into the dehydration body. The pressure on the front edge continues to increase. When it reaches a certain level, the material will be discharged. Open the top of the mouth and squeeze out the extrusion port to achieve the purpose of extrusion and discharging. If too much livestock and poultry manure is pumped in, it will be discharged into the original livestock and poultry manure tank through the overflow pipe, which also plays a role in stirring the livestock and poultry manure. The wastewater separated by screw extrusion filtration can be directly sent to the sedimentation tank, etc. In order to control the discharging speed and moisture content, the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate discharging state.
The solid-liquid separation dehydrator has a high level of automation, is simple to operate and easy to maintain, has a large daily processing capacity and low power consumption, and is suitable for continuous operation. The equipment weighs about half a ton and has a small overall size. It is an ideal manure treatment equipment for large-scale chicken farms and can greatly improve the efficiency of chicken manure treatment.
Power weight submersible cutting pump model