Resin and acrylic jewelry polishing sewage treatment equipment

bcrc > Horizontal spiral automatic discharge centrifuge working principle:
, bcrc >
, bcrc >The drum and screw pusher work at the same time
, bcrc >
, bcrc >High-speed rotation in the same direction,
, bcrc >
, bcrc >The drum and the screw pusher form a differential speed under the action of the differential (the differential speed can be automatically adjusted by the frequency converter)
, bcrc >
, bcrc >When the solid and liquid enter the high-speed rotating drum from the feed pipe through the central axis
, bcrc >
, bcrc >The centrifugal force generated by the high-speed rotation Next
, bcrc >
, bcrc >Use the density difference between solid and liquid
, bcrc >
, bcrc >To quickly separate the solid from the water and deposit it on the inner wall of the drum
/> , bcrc >
, bcrc >The spiral blades that move relative to the drum scrape off the solids deposited on the inner wall of the drum and push them out of the slag discharge port
, bcrc >
, bcrc > The separated clear liquid overflows out of the drum through the opening of the liquid layer regulating plate
, bcrc>
, bcrc>, thereby realizing the working principle of the centrifuge to continuously separate materials.
, bcrc >
, bcrc >The horizontal spiral automatic discharge centrifuge has the following advantages compared with other filter presses:
, bcrc >
, bcrc >First, Advantages of horizontal spiral automatic discharge centrifuge
, bcrc>
, bcrc>: It consumes less energy and consumes less electricity.
, bcrc >
, bcrc >, the working environment is relatively good, and the floor space is not large, generally in
, bcrc >.
, bcrc > to
, bcrc > .
, bcrc >square meters.
, bcrc >
, bcrc >. The filtered mud cake is relatively dry and has low moisture content.
, bcrc >
, bcrc >, large processing capacity, low cost.
, bcrc >
, bcrc >, can work continuously
, bcrc >
, bcrc >Disadvantages of plate and frame filter press with high degree of automation
, bcrc >
, bcrc >Intermittent operation, high labor intensity, low production efficiency
, bcrc >
, bcrc >It is an indirect working device with small processing capacity and troublesome to replace the filter cloth
, bcrc >
, bcrc >, the degree of automation is low, and many processes require manual operation.
, bcrc >
, bcrc >. When the sewage contains sludge with a relatively high viscosity, the solid-liquid separation effect is very poor, and the filter cloth needs to be replaced in a short time, which is expensive to use.
, bcrc >
, bcrc >. The maintenance and repair costs are high. Because the power part of this equipment is hydraulic equipment, the repair and maintenance costs are very high.
, bcrc >
, bcrc >, the processing environment is not good,
, bcrc >
, bcrc >The processing capacity is not large
, bcrc >
, bcrc > cannot work continuously. Second, the advantages of horizontal spiral automatic discharge centrifuge
, bcrc >
, bcrc > are continuous operation, large processing capacity and good filtration effect.
, bcrc >
, bcrc >, small vibration and low noise.
, bcrc >
, bcrc >、Smooth operation and safety. Disadvantages of the belt filter press
, bcrc >
, bcrc >: It covers a large area because the equipment is relatively large.
, bcrc >
, bcrc >. The maintenance cost is high. If there are sharp impurities in the sludge, the filter belt is easily damaged, and the filter belt is expensive.
, bcrc >
, bcrc >, requires auxiliary equipment such as air compressor, and has a complicated structure.
, bcrc >
, bcrc >. The on-site working environment is poor due to poor equipment sealing.
, bcrc >
, bcrc >. The filter belt needs to be washed with a large amount of clean water after work, which causes secondary pollution.
, bcrc >
, bcrc >Based on the introduction and digestion of foreign advanced technology, our company has independently researched and developed an internationally advanced horizontal sedimentation spiral automatic discharge energy-saving centrifuge with a wide range of applications. , clean working environment, better dehydration performance, greater processing capacity, better separation effect, energy saving and drug saving, low comprehensive operation cost, small floor space, low labor intensity, high degree of automation and other advantages. The mechanical properties of the product are much higher than those of the People's Republic of China
, bcrc >**
, bcrc>National Machinery Industry Standard
, bcrc>B/
, bcrc> (Spiral Discharge Settlement Centrifuge)》standard.
, bcrc >
Hourly consultation hotline: Xiao Shen