Ejector IN15, IN25M, IN40M-Spirax Sarco steam injector

Spirax Sarco Steam Ejector,,Detailed introduction: Spirax Sarco Steam Ejector uses steam to heat water or other fluids. When working, the steam injector sucks the liquid from the annular hole, mixes it, and then sprays the heated hot water into the water tank. The circulation caused by the injectors ensures adequate mixing and avoids temperature stratification differences. Three sizes of injectors are available for a very wide range of applications.
The smallest model has internal/external threads and can be installed directly on the wall of the water tank or connected to the water tank through a pipe.
Both have external thread and butt welding types, and the installation is the same.
When higher flow rates are required, two or more injectors can be installed in parallel.
Main features:
Made entirely of stainless steel
Ideal for boiler feed water heating and deaeration
Efficient steam heating of water and other fluids
Heating, mixing and circulation without Moving parts
Compact design minimizes noise and vibration
Pressure and temperature limits
Body design level
Minimum operating pressure.br
Maximum saturated steam conditionsbr @℃
Maximum heating temperature (open water tank) ℃
Material
Austenitic stainless steel
Dimensions/weight (approximate)/
Model B weight
/ .
.
/ .
Available models
,/internal thread and external thread, B or
Other injector options are as follows:

B external Threaded/
External Threaded/
Butt Welded/c
Safety Information, Installation and Maintenance
Detailed installation and maintenance instructions are provided with the product.
Installation Precautions
The injector is installed at a lower position in the water tank, preferably on the center line, and injects steam horizontally. The pipe can be in the tank or outside the tank. Steam pipes must be well secured to prevent vibration and stress on the tank walls. It is recommended to use a suitable adhesive for threaded connections.
The diameter of the pipe is the same as the diameter of the injector, for example, the pipe used by the injector. For the case of multiple injectors, the pipe diameter is as follows:
Number of injectors and model minimum pipe diameter



Between two injectors, or between an injector and The distance between the walls of the water tank must be at least guaranteed, and the outlet of the injector should be as far away from the wall of the water tank as possible.