Telecom safety belt, power safety belt

Number
Specification
Material
Number
Specification
Material
Number
Specification
Material
Number
Belt
Safety belt?
Vinyl
Colored nylon
White nylon
No.
Belt
Safety belt?
Vinyl
Colored nylon
White nylon
No.
Belt
Safety belt?
Cowhide
No.
Belt
Hug Bar belt
No.
Belt
Safety belt
No.
Belt
Full length
No.
Full length thick
Safety belt
No.
Full length, thick and wide at both ends
Width in the middle, safety rope with outer number
Belt
Full length
No.
Belt
Safety belt
No.
Belt
Safety belt
Insurance rope?
No.
Belt
Safety belt
No.
Belt
Safety belt
No.
Belt
Pole belt
Other specifications are negotiable
No.
Belt
Insurance belt
No.
Belt
Pole belt
No.
Belt
Insurance belt
No.
Belt
Pole belt
Nationally stipulated limit pulling force index for accessories
Accessory name
Index requirements
Test data
Belt
Pole belt
Safety rope
Safety rope
Personal protection safety belt High-altitude safety belt Construction safety belt Electrician safety belt
Product overview
Protection for workers in hazardous areas and non-high places to prevent falls and injuries appliance. It consists of a belt rope and metal accessories, collectively called a safety belt.
Qiao Data
①The safety belt material is high-strength polyester and polypropylene
②Standards
Types
①Electronic and agricultural hazard belts
②Full-body safety
br/>③Anti-fall and shock-proof safety belt
Second product uses and characteristics
Worker safety belt is suitable for working under poles in electricians, electricians, gardeners and other types of work.
The body-type safety belt is suitable for manufacturing shipbuilding equipment and other industries.
The drop plus shock safety belt is suitable for climbing and sports. Avoid the risk of falling during climbing.
Using simplicity means safety and reliability.
Adjust the buckle according to your body needs, and is suitable for people with the following frail health.
Small, wear-resistant, mildew-resistant and durable.
Three belt performance requirements and picture corridor
Dimensions of parts
Damage load indicators of ropes and metal accessories
Smart parameters
① What are the differences between electrician safety belts and full-body safety belts? Shen Li suffered super power.
② The anti-fall safety belt and the shock-resistant safety belt are above the fracture layer of the slow-impact safety belt but not above the safety layer.
③The maximum bearing force of the rope exceeds, desulfurization and anti-corrosion.
④The fracture strength of metal parts exceeds the normal strength, and the softness varies from left to right.
Four uses for protection
When purchasing and using a safety belt, you should check that the parts of the safety belt are not intact and may be dangerous. The various rings of metal accessories must not be welded parts, and the edges are smooth.
When using an electrician's safety belt, the protective cover on the pole rope is not allowed to be dragged casually at high altitudes to avoid damaging the rope cover and affecting the rope.
The body-shaped safety belt has the function of being low and high.
When using safety ropes, no knots are allowed.
When using the above short rope alone, you should consider supplementary measures, such as slowing down the impact device and slave lock hook or slave controller under the rope.
The first time you use the seat belt, you must do an internal inspection. During use, you should also pay attention to inspections and test them once every six months to a year to ensure that the components are not damaged. If any damaged variables are found, report them in a timely manner and stop using them to ensure operational safety. Related topic articles: Personal protective equipment introduces the causes and prevention of falling accidents in construction construction
Safety belts are essential safety anti-fall products for high-altitude operations. The safety belts produced are safety belts for high-altitude operations and safety belts for stand workers and electrician safety belts. According to the full belt structure, they are divided into three-point safety belts and five-point safety belts. The five-point safety belts are also called full-body safety belts
. Currently commonly used are double-back seat belts. In the past, seat belts were made of leather, canvas or chemical fiber materials, but nylon seat belts are now produced according to national standards.
Characteristics of seat belts
Polyester webbing has the advantages of good ductility, wear resistance, aging resistance, moisture resistance, and mildew resistance. The five-point safety belt has a back strap and a cross-belt. When a fall occurs, the impact force is dispersed on the arms, double-span and waist, minimizing the impact force on the waist.
The belt is one piece, and its Width is,length.
The width of the belt is greater than , and the length is . The contact part of the strap is padded with soft material, and the outer layer is wrapped with webbing or light leather, with smooth edges and no corners.
The color of the strap's stitching line is consistent with the color of the strap. In the square frame with folded seams on the railing, use a metal rivet with a diameter of 100 mm on the top and a leather and metal washer on the bottom. The rivet surface is smooth.
The colors of the belt are mainly orange, dark blue, dark green, grass green, white, etc.
A pouch can be attached to the belt according to requirements.
The diameter of the safety rope is larger than that, and the twist is /flower/mm. The diameter of the hanging rope around the pole rope is larger than that, and the twist is flower/mm. The hanging ropes used by welders are all covered with fireproofing. The ends of the rope are braided into tracks and twisted to press the strands for flower arrangement, so that the strands are of the same tightness.
The metal hook is equipped with a safety device. The exception is railway hooks. When the teeth of the self-locking hook are used on wire ropes, their hardness is Rockwell type. The metal knuckle spring can be effectively restored more than 10,000 times. The hook body and hook tongue are flat and without deflection.
The surface of the metal accessories is smooth and clean, with no pitting or cracks, the edges are arc-shaped, and the surface has been treated with anti-rust treatment.
Use and Maintenance
Safety belts should be hung high and used low, and attention should be paid to preventing swinging and collisions. Users should be professionally trained and qualified before they can be used on the job. The use method should be correct. Do not use inappropriate methods at will!
The various parts of the seat belt must not be disassembled or assembled at will.
In order to ensure safety, when using the seat belt, you must tighten the belt faucet, and turn the belt back into the small holster. It must not be used in places with high temperatures above
℃, and should be kept away from sharp flames and corrosion. When using sexual chemicals, it must be checked before each use. If there is any abnormality, it should be stopped and replaced immediately. After the hook mouth of the threaded self-locking hook is self-locked, the second protection nut should be manually twisted to the closed state to ensure better protection effect.
Seat belt storage should be managed by designated personnel. When storing, please note that it should be stored in a dry and ventilated warehouse and protected from rain and sun. When transporting, do not use tools with barbed hooks, do not come into contact with corrosive chemicals such as open flames, high temperatures, strong acids and alkalis, do not come into contact with sharp and hard objects, and do not expose to the sun for a long time.
If the used safety belt needs to be cleaned, it can be put into low-temperature water and gently scrubbed with soap, then rinsed with clean water and then dried. However, it is not allowed to be soaked in boiling water, exposed to the sun, or used. Fire roasted. After one year of use, the seat belts will be inspected in bulk according to the purchaser. The fence belt is subjected to a static load test with a tensile force of kilograms for one minute. The hanging safety belt is subjected to an impact test with a kilogram human-shaped sandbag. The free fall test does not break. This batch can continue to be used. Do a tension test on the back protection rope to check whether the buffer belt has been used or not. The buffer belt is opened once and cannot be recycled. Check the outer ends of the seat belt and accessories to see if there is any other damage. Once found, stop using it immediately. . Sample tapes that have been sampled and tested must not be reused, and designated personnel should be assigned to handle them to prevent misuse by others.
Safety belts are personal protective equipment used to prevent falls and injuries during high-altitude operations. They consist of straps, ropes and metal accessories. Our factory specializes in the production of electrician safety belts
High altitude safety belts, electrician single control safety belts, electrician double control safety belts, electrician all-round double insurance safety belts
Single waist safety belts, electrician double safety safety belts, single Safety seat belt
Double safety safety belt. Seat belt/full body safety belt, single waist safety belt, speed differential single waist safety belt, self-locking safety belt, suspended double back belt, double back safety belt, simple full body safety belt, five-point safety belt , full-body safety belt, single-head buffer rope, double-back safety belt, high-altitude full-body safety belt, red double-back safety belt, white double-back safety belt, red single-back safety belt. The quality is reliable and the price is reasonable. Customers are welcome to visit the factory for inspection. Can be customized according to user requirements
Our company always adheres to the principle of customer first and quality first, and is willing to provide more perfect services to the majority of users with more favorable prices, better quality, and faster methods among similar products.
The high-altitude work safety belts produced by our factory have high strength and good safety performance, and are widely used in power installation, curtain wall cleaning, rock climbing and other high-altitude operations.
Serial number, product name, model
Electrician pole rope with single belt type***
Telecommunications pole rope with single belt type***
Universal pole rope with single belt type** *
Universal hanging single waist type***
Universal hanging double safety seat belt****
Nylon foot buckle strap*
It is widely used in power generation and power supply key projects Construction, post, telecommunications, mining, military industry and other high-altitude working protection. Advantages: high strength, wear resistance, moisture resistance, mildew resistance, high temperature resistance, cold resistance, alkali resistance and other functions. Simple and convenient, safe and practical
[Name] Safety belt
Made of high-strength synthetic fiber woven belt ropes and various metal accessories are made of carbon steel. After passing the impact test, the overall simulated human body impact test load is, The overall tensile test exceeded, the product has good cushioning properties, and various test indicators are in line with the national standards of the People's Republic of China.
This product is a special protective product for electricians. We also produce foot buckles and various rope products
Product name
Unit
Specifications
Model
Seat belts
Strips
Ordinary white< br/> Telecom rope
Safety belt
Strips
Ordinary white
Power board
Seat belt
Strips
Good white
Telecommunications Rope
Seat belt
Strips
Good white
Power board
Seat belt
Strips
White double insurance
Seat belt
Strips
Red double insurance
Seat belt
Strips
Red single insurance
Seat belt
Strips
Red flat hook stamping parts
Safety belt
Strips
Northeastern braid
Safety belt
Strips
High-altitude safety belt
Safety belt
Strips
Rack Industrial
Usage: It is used for high-altitude operations such as electrical installation and maintenance. It is suitable for use by outside electricians, telecommunications manual operations, wire maintenance and other similar types of work.
Nationally stipulated factory test limit tensile strength index
Accessory name
Index requirements
Experimental test
Belt
Pole belt
Safety rope
Insurance rope
The state stipulates factory test indicators and load weight.
Advantages: high strength, wear resistance, durability, mildew resistance, acid and alkali resistance, simplicity, lightness, safety and application.
Instructions for use: Every time you use the seat belt, you must make an appearance inspection. Pay attention to the inspection during use, and test it once every six months to a year.
It is required that the main components are not damaged. If any damage or deterioration is found, report it promptly and stop using it to ensure safe operation