Thread tensioner Thread tensioner

Wire tensioners are used to tighten wires during overhead line laying construction. When using it, first loosen the steel wire rope or galvanized iron wire on the wire tightener, fix it on the cross arm, clamp the wire with wire clamps, and then pull the special wrench. Due to the anti-reversal function of the ratchet, the wire rope or galvanized iron wire is gradually wound around the ratchet drum to tighten the wire. Secure the tightened wire to the insulator. Then first loosen the pawl to loosen the wire rope or galvanized iron wire, then loosen the clamp, and finally wind the wire rope or galvanized iron wire around the drum of the ratchet.
Working Principle When using the wire tightener, first loosen the steel wire rope or galvanized iron wire on the wire tightener, fix it on the cross arm, clamp the wire with a wire clamp, and then pull the special wrench.
Thread tighteners can improve safety during cargo transportation and lifting.
The multi-functional wire tightener is used to tighten steel stranded aluminum stranded wires and other lines. It has a large telescopic length. Product No. Model Specification Wire Rope Length Weight
Double Hook Wire Tightener Application
Suitable for tightening wires, installing pull wires and replacing insulators.
Use of ratchet wire take-up device This product is used in conjunction with the wire clamp to tighten wires and ground wires.
The ratchet type lever hoist is used to tighten steel stranded aluminum stranded wires and other lines.