Product Details
The fiberglass insulated ladder is made of glass fiber with excellent insulation properties, which is corrosion-resistant and high-voltage resistant. , good waterproof performance. Model
Name
Full length
Specific gravity
Tread width
/>
Weight-bearing
Insulated ladder
< br/>
Insulated ladder
< br/>
Insulated ladder
< br/>
Insulated ladder
< br/>
Insulated ladder
< br/>
Insulated ladder
< br/>
Insulated ladder
< br/>
One edge ladder classification
Insulated ladders are divided into insulated single ladders, insulated joint ladders, insulated single straight ladders, insulated combined ladders Ladders, insulated herringbone ladders, insulated lifts (insulated telescopic single ladder, insulated telescopic combined ladders, insulated telescopic herringbone ladders, insulated high and low stools, insulated high stools, insulated lifting platforms, fully insulated scaffolding, insulated high and low stools, insulated high stools, etc. .
Characteristics of Eryuan Ladder
Non-conductive, novel appearance, beautiful and elegant
Corrosion resistance (with acid resistance, alkali resistance, resistance to organic solvents and salts and other corrosion properties of gas and liquid media. According to the requirements of actual use occasions, o-phenylene, iso-phenylene, and vinyl resins can be economically selected as the base material), resistant to decay and fading
Light in weight, easy to transport
Low water absorption, Good flame retardancy (the flame propagation rate of ordinary flame-retardant gratings ( ) does not exceed the flame propagation rate of advanced flame-retardant vinyl gratings. The oxygen index is not less than ( ))
High strength, lightweight (glass fiber reinforced plastic grating The density of the grid is not greater than / of steel and / of aluminum. Its strength is twice that of hard polyvinyl chloride, and its absolute strength exceeds that of aluminum and ordinary steel. It has excellent impact resistance, insulation and magnetic permeability.
Manufacturing process of Sanyuan ladder
?
? The insulating ladder adopts high-temperature polymerization and pultrusion manufacturing process, and the material is made of epoxy resin combined with pin rod technology. Aluminum alloy material parts have been surface anodized, and shaft steel parts have protective coatings on their surfaces. Insulating laminated material parts are processed with insulating paint on their surfaces. The anti-slip design of the ladder supports and ladder feet is not easy to fatigue. The appearance of each ladder component has no sharp edges and corners, which is highly safe. It has strong insulation performance, low water absorption and corrosion resistance.
Precautions for use of FRP insulated ladders
Before use, each time you use the ladder, you must carefully check whether there are cracks, severe wear and damage on the ladder surface, spare parts, ropes, etc. When using the ladder A hard, flat ground should be chosen to prevent the risk of tilting. If the height of the ladder exceeds 1 meter, be sure to set up a pull cord on the middle and upper part of the ladder to check whether all ladder feet are in good contact with the ground to prevent slipping on the ladder without the manufacturer's permission. Under normal circumstances, the ladder should never be attached with other structures, and a damaged ladder should never be used or repaired. When lifting a ladder, it is strictly forbidden to hold the cross brace to prevent cutting fingers. It is absolutely prohibited to exceed the working load of the ladder when using it. The ladder feet have anti-slip effect. However, someone still needs to hold the ladder directly with their hands for protection (at the same time, place the ladder sideways and step on the feet of the ladder to prevent the feet from moving. When climbing a ladder or working, always keep your body on the side of the ladder rams. Support the middle, keep your body upright, and do not stretch out, otherwise you may lose your balance and cause an accident.
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【FRP ladder insulated herringbone ladder】are provided by member【Bazhou Xinsheng Telecommunication and Electric Power Equipment Factory
】,By Titker Trade Network members 【Bazhou Xinsheng Telecommunication and Electric Power Equipment Factory
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!