Year1
- 规格：
- 可定制
- 型号：
- 各种
The utility model belongs to a wall panel forming device, in particular to a wall panel forming machine. It includes a hydraulic press and a mold car, and is characterized in that the interior of the mold car is divided into isolation cavities by an isolation plate. A core-pulling hole is provided longitudinally on the front baffle of the mold car, and a bolt hole is also provided on the upper side of the baffle, through which the bolts are connected to the left and right sides. Each baffle is fixed, and the bottom of the mold car is connected to the baffle. The beneficial effect of the utility model is that the arrangement of core-pulling holes makes the processed wall panels contain sound-insulating holes, and the produced wall panels are light in weight and have good sound-insulating effects. The use of isolation panels can improve work efficiency, and multiple wall panels can be formed at one time.
Features of lightweight partition board equipment
)
Plastic core tube, no flushing, electric pumping, and pumping is not limited by time.
)
Can be adjusted to any length, one machine can be used for multiple purposes.
)
Automatic opening and closing of the mold, automatic temperature control.
)
Small investment, simple operation and convenient maintenance.
)
Strong mechanical properties, high double-sided molding precision, accurate thickness and good flatness.
)
It requires less labor, occupies a small area, is flexible and can be used for on-site production.
)
Provide one-stop services such as complete production technology, formula, installation and construction technology, technical inspection data, certificates, etc. This equipment has passed the appraisal of scientific and technological achievements and has been designated as a promotional product.
Feasibility Analysis
Patented products have high technical content, low investment, high output, short cycle and fast returns.
Low investment: This project has low investment and high output. The efficiency is good, the cost profit margin is large, and the output value profit margin is high.
The market is good. New wall materials have broad prospects and obvious competitive advantages. Good performance: This product can fully meet various performance requirements of non-load-bearing lightweight walls.
Good policy This project has the advantages of energy saving, consumption reduction, waste recycling, etc. It is in line with policy guidance and is strongly supported by the state.
It is of great practical significance for enterprises to upgrade and transform and develop building energy conservation, as well as protect water and soil resources, maintain ecological balance, etc.
Investment Analysis Conditions for establishing a lightweight partition board production line with an annual output of 10,000 square meters (taking boards as an example)
An area of square meters and a factory building of square meters.
The comprehensive local price plan for production water and electricity is/square meter.
Enterprise employees
Production process
Send the raw materials to the mixer through the conveyor belt according to the proportion (manual)
Mix evenly and stir through the machine (mechanical)
Automatic injection Material machinery)
Edge closing (manual)
Piping (mechanical)
The products are rolled off the production line and stacked
installed and used.
1. Introduction to the standing mold insulation board equipment
A wall panel equipment designed and produced through bold innovation. This equipment is based on most of the domestic assembled standing formwork partition board equipment. It consists of two major systems: foaming mixing pumping system and mold pouring system. It will dominate the future market due to its low investment, high efficiency and wide range of wall panel production types. Foaming mixing pumping system mold set
2. Advantages of the equipment
According to the pumping volume, I divide it into three types: large, medium and small.
Using foaming mixing pumping system. The pumping volume per hour is cubic, cubic, or cubic. No matter which one is chosen, only three workers are needed during formal production. Two of them complete the foaming and mixing task, and one worker holds the pump tube and supplies it to the mold. Just pour it in. This production method can save a lot of workers and improve production efficiency. The demoulding method adopts one-time overall demoulding. Each group of mold-setting insulation board equipment can produce wall panels at one time. All demoulding can be completed in less than an hour, and the efficiency is as high as you can imagine
3. The vertical mold insulation board equipment has a wide range of production
It can widely produce a series of lightweight partition boards , this kind of production line is a multi-purpose production line. Including pure foam lightweight partition panels, foam sandwich lightweight partition panels, inorganic non-combustible exterior wall insulation panels, fire door core panels, etc.
Product Features of Mold Insulation Board Equipment
Energy-saving insulation adopts advanced Australian technology, which is made of reinforced calcium magnesium board and polystyrene particles, cement and other lightweight materials under high pressure. It has good insulation effect and is energy-saving. ,/National Exterior Wall Standard, there is no disadvantage of adding insulation boards after laying bricks.
High strength and high strength bending failure load can reach more than three times the self-weight of the wall panel, exceeding the national standard.
Impact resistance It has impact resistance and meets the national standard.
WhatsApp
