DZSF series linear vibrating screen | XUM vibration motor | ZF attached plate vibrator

Series linear vibrating screen_Copy_Detailed introduction
_Features and uses
Series linear vibrating screen is composed of screen box, screen frame, vibration motor, vibration reduction system and frame. The linear vibrating screen uses a vibration motor as the vibration source. Two identical vibration motors fixed on the screen box perform self-synchronous rotation in opposite directions. The centrifugal force generated by the eccentric block of the vibration motor at each instantaneous position during rotation is along the The reciprocating motion in the throwing direction causes the entire screen machine supported on the shock absorber to vibrate in a straight line, causing the material to move forward in a straight line while being thrown up on the screen surface. After the material falls into the screen frame from the feed end, it moves forward rapidly. , loose and through the screen, complete the screening operation, and achieve the purpose of screening by reasonably matching the screen mesh. Linear vibrating screen is a small and medium-sized multi-layer screening machinery with international advanced level. It is suitable for screening any dry materials, and the maximum feeding particle size should not be larger than this. It is widely used in grading or sorting powders and small and medium-sized materials such as metallurgical powders, chemicals, fertilizers, abrasives, medicines, grains, ceramics, coal, refractory materials, building materials, etc.
This series of vibrating screens has the advantages of small size, simple and reasonable structure, high screening accuracy, fully enclosed and pollution-free, low noise, low energy consumption, convenient repair, simple maintenance, and long screen life. It can be used in single layer or multiple layers, up to five layers. The screen frame is generally made of wooden structure. If the screen hole is larger and the output is higher, the screen frame can be made of steel structure. If corrosive materials are screened, the screen frame can be made of steel. The contact parts are made of stainless steel. The motor installation method can be divided into downward vibration type and side vibration type, and the shock absorber installation method can be divided into seat type and hanging type. Special designs can also be made according to user needs.