Xi'an UPS power supply quotation Shante UPS power supply quotation

Pay attention to discharge and stay away from strikes. For more information on power supplies and batteries, please call us by phone. Mr. Jiao believes that most friends only know how to continuously charge the power supply, but do not know how to discharge it in a timely manner, let alone how to discharge it correctly. In fact, charging and discharging the power supply correctly is an important part of properly maintaining and maintaining the power supply. If you only pay attention to its charging and not its discharge, the power supply will also go on strike at any time, because most of the batteries used in the battery pack It is a lead-acid battery. This type of battery generally has self-discharge. If we ignore its discharge phenomenon, it will not take long for it to go on strike. In severe cases, it can have a fatal impact on the battery. Generally speaking, we should take measures to prevent the battery from being deeply discharged. After all, if the battery is over-discharged frequently, the service life of the battery will be greatly shortened. Although there are many well-known brands of batteries with over-discharge protection function, if the battery is charged with a small amount Discharging with a load or even discharging without a load is particularly likely to cause deep discharge. If the battery is deeply discharged, then when we recharge the battery, it will take at least about an hour to fully charge the battery, which will greatly reduce the battery's efficiency.
Under normal circumstances, foreign brand batteries can be used for about 20 years, and some domestic brands of batteries usually have a service life of 20 years. However, if we do not pay attention to the discharge phenomenon of the battery, no matter what brand of battery, It will be scrapped in a short time, but as long as we pay attention to the details and discharge the power supply every three months, we can ensure that the service life of the battery is not compromised. In order to effectively extend the service life, we must pay attention to the discharge of the battery to ensure that the battery can always be in efficient working condition. The specific steps to discharge the power supply are to first connect the output end of the power supply to the load, and then disconnect the mains power supply so that the power supply is always in the discharge working state. During the discharge process, the voltage at both ends of the power supply is monitored. Once the terminal voltage is found When it drops to the right, turn on the mains power to charge the battery continuously for about an hour, so that the battery activity will not be affected.