Year1
- 材 质：
- PVC塑胶地板
- 规 格：
- 15mx1.42mx4.5mm
- 厚 度：
- 3.5mm、4.5mm
Plastic sports flooring is widely used in various sports venues, such as badminton, table tennis, volleyball, tennis, basketball, handball, indoor football competition and training venues, multi-functional Venues, various gyms, dance studios, schools, unit union activity rooms, multi-functional halls, amusement parks, kindergartens, sporting goods stores, offices, hotels, hospital activity venues, etc.
The advantages of using plastic flooring in badminton halls are.
, colorful, bright colors
, water-based raw materials, non-toxic, green and environmentally friendly products
, easy to construct, strong adaptability to the climate environment
, high weather resistance, not easy to age, Long service life, good light fastness, deep coloring, long-lasting color
, excellent wear resistance, anti-slip, not easy to powder
, good elasticity, not easy to crack, comfortable movement feeling
, strong adhesion, high peeling strength, not easy to delaminate, good air permeability, not easy to foam
, convenient daily maintenance, low cost
Construction requirements for rubber flooring in badminton halls
1. Ground type
Absorbent ground inorganic non-metallic materials, such as concrete, cement mortar, anhydrite, etc.
Non-absorbent ground non-porous or smooth surface base, such as stone, asphalt, glazed Ceramic tiles, wooden boards, etc.
2. Ground requirements
, The base layer shall be a fine stone concrete layer or a cement mortar leveling layer with a design strength not less than that of the base layer, and the surface shall be calendered
. The surface hardness of the base layer shall be is larger than Pa, so the concrete or mortar leveling layer must be cured with wood chips or thin film, and the curing period shall not be less than days, and the solidification period shall reach days
. According to the construction and acceptance specifications of building ground engineering, the paving floor surface layer The acceptance standard for the base layer (leveling layer) is that the surface flatness of the base layer should be no more than 100 millimeters. According to the construction process requirements of the plastic floor, the moisture content of the base layer must be less than (a simple test method will be a centimeter square Use tape around the plastic to stick to the ground, and remove it after an hour. If the area changes color, it means there is still moisture underneath, and it must wait for further drying, and construction cannot be carried out). After the strength of the base layer is reached, the room must be ventilated to keep the room dry
There should be no pitting or cracks on the surface of the base layer (except for natural cracks caused by shrinkage). During the maintenance process of the base layer, no one is allowed to enter the room, or be put under pressure. Construction of fine stone concrete is prohibited. During the process, use a flat vibrator to vibrate tightly to avoid hollows
If stains such as grease and paint appear, they must be cleaned with cleaning agents. If the base surface is uneven, it should be repaired in time. If there is a large area, it needs to be polished. Machine grinding
, The temperature of the construction environment should not be lower than, and the humidity should not be higher than
. The ground must be thoroughly cleaned, and a high-power vacuum cleaner (water absorber) must be used to clean it thoroughly.
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
WhatsApp
