Guangzhou multi-parameter respiratory heart rate blood pressure monitor

Telephone Handset
Model
Type Multi-parameter Bedside Monitor
Product Appearance and Performance Features
Large screen, wide viewing angle, true color LCD high-definition display, Chinese and English interface
Real-time display of three waveforms: ECG, blood oxygen saturation, and respiration, and displays heart rate/pulse, body temperature, respiration, blood saturation, blood pressure (systolic blood pressure, diastolic blood pressure, mean pressure) and other values on the same screen, optional respiration End monitoring function
Blood pressure measurement is divided into manual, periodic and rapid measurement
Multi-channel display on the same screen
Monitor body surface and body cavity body temperature, and display the temperature difference in real time
Capable of monitoring, surgery, diagnosis Three monitoring modes
Has two display modes: standard interface and large character interface
The color of the waveform interface can be set according to needs
Has screen freezing and setting storage functions
Can store hourly data Trends to facilitate doctor diagnosis
Can store ECG and all trend data for more than one minute of playback
Can store trend data such as blood pressure, heart rate, body temperature, blood oxygen saturation, respiratory rate and other trend data during group pressure measurement
Optional built-in recorder to record a variety of waveforms and events
With three-level alarm settings and free adjustment of upper and lower alarm limits
Resistance to defibrillation, resistance to high-frequency electrosurgery, and can be triggered by the heart Use the pacemaker at the same time
On-board power supply system, AC and DC, the working time can reach more than 10 minutes when the power is outage
LAN interface, you can connect to the central monitoring system at any time
Maintenance and attention of the monitor Matters
Summarizing past work experience, the maintenance of the monitor mainly includes the following aspects
Maintenance of the sensor. Due to the characteristics of the sensor itself and the detected patient parts are often in motion, are easily damaged parts. In order to extend their service life and reduce treatment costs, we should do a good job in maintaining them. It is necessary to operate and maintain the monitor and sensor correctly. Do not bend or pull the sensor transmission wire and do not drop or touch the sensor probes such as blood oxygen saturation probe, temperature, invasive blood pressure and other probes. For non-invasive blood pressure cuffs, when not tied to the patient, the host must turn off automatic measurement at this time to avoid damage to the cuff due to frequent inflation. If the monitor needs to be monitored for a long time and does not need to monitor blood oxygen saturation, this function can be turned off by adjusting the system configuration, thereby extending the service life of this sensor. The sensor probe is easily stained with various dirt such as sweat and blood. In order to avoid corroding the probe and affecting the measurement, regular maintenance is required.
System maintenance Improper or even wrong settings of the monitor system often cause trouble for medical workers. For example, if there is an ECG waveform but no heart rate, the blood pressure parameters of patients with hypertension cannot be measured and the display is normal, but the alarm keeps alarming. The patient type is incorrectly selected. They are generally divided into adults and children. They use different measurement plans. If Choosing the wrong one will affect
the accuracy of the measurement, or even make it impossible to measure, etc. These may be caused by incorrect system settings. Therefore, it is necessary to frequently check and maintain the system to ensure the reliability and optimality of monitoring, that is, the best configuration.
Maintenance of function settings Achieve the best effect by adjusting the function settings of each parameter, such as adjusting the amplitude and wave speed to make the displayed waveforms easy to observe. Eliminate errors by using filter functions of various bandwidths
Correctly set the upper and lower limit alarm values of each parameter for interference from different frequencies such as frequency and electromyography, and set the alarm configuration such as display channel, system clock, alarm volume, screen brightness, etc.
Keep records of the operation of the instrument, especially the timing and phenomenon of failure, for maintenance and inquiry
Be careful not to damage the appearance of the instrument. In particular, the probe, buttons and connecting cables are strictly prohibited from mechanical damage. Stop using them immediately after damage, especially Do not turn off the machine at will during work, develop good habits, and turn off the power after each operation is completed.
After each monitoring, clean the probe with a dry cloth or paper towel.
After use every day, turn off the power of the host. If the use environment is not good, cover it with a protective cloth. Use a dry cloth or paper towel with a little alcohol to wipe the probe and button for disinfection. Be careful not to use too much alcohol to avoid soaking into the probe. Internal
Keep the outer surface of each part of the instrument clean. Regularly wipe it with a cloth dipped in cleaning fluid. Be careful not to get the cleaning fluid into the case. Wipe dry after cleaning to avoid condensation.
Only wipe the monitor screen with a dry cloth.
If you need to transport the instrument, do not dismantle it within 10 minutes after shutting down. This will allow the heat in the machine to dissipate. Put other parts into the accessory box.
Instruct patients and relatives not to use or adjust the monitor without authorization, causing damage to the instrument.