Small sewage suction truck price | sewage suction truck brand

A fecal suction truck mainly consists of a car chassis, a tank, and a fecal suction device. Commonly used models include Dongfeng Forica, Dongfeng Dolica,, rear double axle, four in the front and eight in the rear.
The components of the fecal suction truck include oil-water separator, water-gas separator, special vacuum fecal suction pump, volume pressure gauge, pipe network system, suction conduit, self-flow valve, vacuum tank, and connector (fecal viewing window is fully automatic Anti-overflow valve.
Scope of application
Mainly used to pump and transport feces and other sewage for urban and rural sanitation departments. It is suitable for pumping feces, sewage, sludge and liquids mixed with small suspended debris. It is suitable for municipal sanitation, large, medium and small industrial and mining enterprises, communities, schools, septic tank cleaning and transfer, urban pipeline cleaning and dredging, factory biogas slurry and biogas residue cleaning, etc.
When purchasing models
, pay attention to the quality of the boards. Vacuum sealing, poor materials can easily cause problems such as tank deformation.
, Selection of vacuum kits, pressure bearing capacity and perception of temperature differences. Veyron series products are the first domestic kits.
, Rear gravity valve The choice is based on the local operating environment, temperature difference, etc.
The company is located in Jiaxiang County, Jining City, Shandong Province. It sells fecal suction trucks, sewage suction trucks, sprinkler trucks, high-pressure cleaning trucks and other products all year round. The company adheres to the user needs As the core, we adhere to the business philosophy of quality and first-class service. We have won unanimous recognition and high praise from customers in the machinery and industrial equipment cleaning and cleaning equipment industry. The company takes it as its own responsibility to create value for customers and looks forward to serving you!
Suction work
Suction work
The fecal suction hose is sucked into the fecal liquid as deep as possible, ensuring that the end of the pipe is always below the liquid level during the operation.
Push the handle of the four-way valve to the The ground is vertical.
Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch back to shift into gear and take power, and the vacuum pump starts running.
Open the tool box in the cab and pull out the power take-off switch. Turn on the buzzer switch and turn on its power.
The operator should pay attention to monitor the situation near the inlet of the fecal suction hose and use appropriate tools to block debris to avoid clogging.
The operator can pass the observation mirror on the top of the rear head , when the liquid level reaches the middle of the sight glass, the driver should be notified, and colleagues should quickly pull the fecal suction hose off the ground or close the four-way valve. Under normal circumstances, the buzzer will emit an audible and visual signal at this time, and the driver will receive The signal should be to reduce the throttle, push the power take-off switch forward and out of gear, stop the vacuum pump, press the buzzer switch, and cut off its power supply.
Place the fuel tank through-cock cock handle plate parallel to the axis of the inlet mailbox. Close.
After flushing the hose, put it back into the platform box, close the side door, and make the boom face above the cab.
Close the anti-overflow valve so that its handle is perpendicular to the road axis.
Drive the septic suction truck away from the work site.
Discharge operations
Point the septic suction hose into the septic tank.
Pull the rear handle of the four-way valve parallel to the ground and open it The anti-overflow valve can be adjusted so that its handle is parallel to the axis of the pipeline.
Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch backward to put it into gear to take power, and the vacuum pump starts running.
After the fecal liquid in the tank is discharged, the driver should promptly push the power take-off control handle forward to disengage and stop the vacuum pump.
Close the fuel tank straight-through cock handle plate parallel to the axis of the inlet mailbox. After flushing the hose, put it back into the platform box, close the side door, and make the boom face above the cab.
Drive the fecal suction truck away from the work site.
This large type of truck is not suitable for rural use and cannot enter the farmyard, so it is not suitable for rural use to use a three-wheeled slag extraction truck!