Year1
- 型号：
- 齐全
- 规格：
- 齐全
Features of our company's cassette fan coil products
Using plastic fans [] is light in weight and increases the air volume driven by the same motor
The mold manufacturing blade angle and the volute cavity have good consistency Achieving a silent effect
The flow channel and blade angle are optimized through software for high efficiency
The volute is divided into upper and lower parts for easy disassembly.
Application of fluid software design
The unit’s flow channel structure is optimal
The air inside the unit is evenly distributed and flows with low noise
There are few internal vortices and high efficiency.
Product Installation
) The unit must be installed securely and the reliability of the installation must be checked regularly three or four times a year.
) Please avoid places with oil mist (such as kitchens, otherwise plastic parts will age and fall off or cause water leakage.
) Please avoid places where corrosive and flammable gases are generated.
) Leave enough installation space around the unit and keep the air inlet and outlet away from obstacles to ensure that the airflow can blow throughout the room.
) When installing and using hanger bolts, check whether the installation position can withstand twice the weight of the unit. If not, it should be reinforced before installing the unit.
) When hoisting the fan coil unit, ensure that the hoisting in the horizontal position is only allowed to bear its own weight and not bear the external force of air ducts, water pipes and other objects.
) Before installation, pay attention to cleaning the inlet and outlet pipes. Users need to install a filter at the water pump outlet to prevent foreign matter from clogging the valve.
) When connecting the inlet and return pipes, do not use excessive force and use raw material tape to seal them to avoid leakage.
) Pipes must be insulated to avoid condensation during use in summer and valves should be installed on the inlet and return pipes.
) The condensation water pipe should be kept clear and the drainage slope
) When using this product, a filter should be installed at the return air and cleaned regularly to avoid affecting the normal heat exchange effect.
) When the fan coil unit is operated for the first time, the air release valve on the return pipe must be opened to purge the air in the coil unit, and then the air valve must be closed after water flows out.
) The use of cold water should not be lower than ℃ and hot water should not be higher than ℃ and the water quality must be clean. The unit should be fully maintained for a year and the scale in the coil should be removed chemically to ensure the heat exchange performance of the unit.
Warranty
Year
Category
Complete
Factory Direct Sales
Yes
WhatsApp
