Year1
- 规格：
- 齐全
- 型号：
- 齐全
- 功率：
- 100
Features of Greed vertical exposed fans
High efficiency and sufficient energy
The coil tube is made of high-quality seamless copper tubes and aluminum sinusoidal corrugated heat sinks through hydraulic or mechanical expansion. The best effect will be achieved if the fins and copper tubes are absolutely tight. ]
Large air volume and low noise
Using ultra-wide-angle volute multi-blade centrifugal wind wheel and motor with various reasonable matching, low noise can meet various needs of the unit
Safe, reliable and long life
The motor is a grade induction motor with a built-in temperature rise protector that will generally not burn unless there are special circumstances. Each unit coil has undergone high-voltage leak detection to ensure that the unit will not leak.
This product is widely used in low-noise places such as hotels, office buildings, shopping malls, hospitals, restaurants, exhibition halls, etc. to better meet people's requirements for comfort.
Unit Features
Using unique hyperbolic window fins and fork-row heat exchange copper tubes to fully enhance air flow disturbance. Adjust the fin distance and optimize the pipeline design to comprehensively improve the coil heat exchange efficiency.
Optimize the motor structure based on the fan performance curve to make the performance curves of the fan and motor consistent. Minimize the change in air volume when the fan load changes.
The single-piece forged brass water collector makes the distribution of chilled water in and out of the coil more uniform and reduces the flow resistance, fully utilizing the full efficiency of the heat exchanger and greatly reducing the flow resistance of the water system.
The optimized design of the drain port of the condensate pan discharges the condensate water generated during operation of the unit to the maximum extent, greatly reducing the growth of bacteria and microorganisms.
Add a sterilizer to the unit (optional accessories can kill a large number of bacteria and viruses in the air to comprehensively improve air quality.
The unit casing is made of high-strength and high-quality electro-galvanized steel sheets that are punched, bent and anti-corrosion. Strong. The inner wall of the roof plate is pressed with a hot-pressed thermal insulation cotton to prevent the occurrence of cold bridge. The bottom of the water pan is wrapped with a hot-pressed thermal insulation cotton and firmly attached to prevent secondary condensation.
Single-phase three-speed permanent magnet capacitor type The asynchronous motor is an important power driving component of the unit. The central rotating shaft of the motor is tempered and subjected to strict surface chrome plating anti-corrosion treatment to prevent rust and wear. It is equipped with high-precision permanently lubricated Japanese painted rolling sealed bearings to ensure high efficiency and ultra-low noise requirements.
The starting capacitor is completely enclosed in a metal casing and is designed to be integrated with the motor casing. The external leads of the motor are passed through metal hoses to comply with international fire safety standards.
The extended condensate pan design makes the external pipe valve The joints are all protected by the condensate pan to ensure that no condensate leaks out.
Double air inlet forward-inclined airfoil centrifugal galvanized steel plate wind wheel undergoes strict dynamic and static balance testing. The processed air is transported in a streamlined manner to reduce the risk of condensate leakage. The generation of vortex airflow greatly reduces the noise generated by airflow friction, and the unit runs more smoothly and quietly.
The unit has undergone strict operation withstand voltage and insulation tests before leaving the factory. The motor terminals are all placed in a special electrical box to ensure safer operation of the unit.
Each heat exchanger has been tested for leaks by high-pressure water. And strict pressure and air tightness test units allow the maximum working pressure to ensure the operating performance and quality of each unit.
Usage occasionsUse occasions
When the unit uses cold water, it should not be lower than ℃ to prevent condensation. The hot water should not be higher than ℃ (commonly used ℃).
The water quality is required to be clean and soft.
It is recommended that the unit operating temperature ≤ ℃ relative humidity ≤
WhatsApp
