Year1
- 型号：
- 齐全
- 规格：
- 齐全
- 材质：
- 玻璃钢
Square cross-flow cooling tower manufacturer price model Square cross-flow cooling tower uses air inlet from both sides and a fan at the top to make the air pass through the fillers on both sides of the tower and exchange media with hot water, and the hot and humid air is discharged outside the tower . The filler uses a wave plate with raised points on both sides. The wave plate is bonded into a whole through the installation head to improve the rigidity. The raised points on both sides can also avoid direct dripping of water, thus improving the water film forming ability. The tail of the filler is equipped with a retractor. water measures. Scope of application
It is widely used in a large number of circulation systems in petrochemical, metallurgical, electric power and other enterprises. It is suitable for severe cold areas in northern my country and effectively solves the problem of freezing blinds in winter. It uses a variable torque and pole motor, making it the leading domestic and foreign leader in terms of thermal performance, power consumption tower stability and noise. Main features
Space-saving, lightweight structure
Using high-efficiency heat exchange packing specially designed for this series of cooling towers, its heat exchange area is greatly increased. Compared with the original series and the original series, it occupies less space. The area has been greatly reduced, and due to the optimization of structural design and the use of steel structures, the operating weight has also been greatly reduced.
Save electricity
Use filler with low ventilation resistance and high-efficiency airfoil-type fiberglass fans designed by Tsinghua University specifically for cooling towers, thereby reducing the power of the motor used. The motor used in the ultra-low noise type It has smaller power and saves more electricity. It can also be equipped with a two-speed motor to save electricity according to the user's requirements.
Extremely low operating noise
The wing low-noise axial flow fan made of materials specially designed for cooling towers by Tsinghua University and the low-noise motor specially designed for cooling towers reduce the noise of the cooling tower. Operating noise. The ultra-low noise series cooling tower has lower operating noise and fully meets environmental protection requirements. If equipped with a two-speed motor, the noise can be further reduced when running at low speed at night. Users who require a two-speed motor should make a separate request when ordering.
Good corrosion resistance
The tower sink and panels are made of materials with good corrosion resistance, and a light stabilizer is added to the gel coat resin, which has good anti-aging properties and will not discolor for a long time. . The steel structural parts of the tower body are galvanized after processing to improve the corrosion resistance of the cooling tower. During the normal service life, no additional anti-corrosion is required.
Convenient combination
Combination methods can be used to meet the requirements of different working conditions. The user can also decide the combination according to the site conditions, and the appearance of the cooling tower can be adjusted according to the user's building characteristics. For example, user space is very limited. Our company can also design according to the special requirements of users to meet their requirements for thermal performance and noise.
Easy to maintain
This series of cooling towers has a combined design, and the air chambers of adjacent cooling towers are separated from each other. Maintenance and inspection, filling water pipes and water tanks can be cleaned under the premise of normal operation of the cooling tower. work more conveniently.
WhatsApp
