FRP desulfurization dust collector, boiler dust collector, flue gas purification tower

The desulfurization dust collector produced by our company is a dust and sulfur removal product made of glass fiber reinforced plastics using a winding process
It has low cost
Short production cycle
Long life
Easy processing< br/> Simple installation
Light weight
High strength
This product is currently widely used in electric power
Fertilizer
Chemical industry
Smelting
Petroleum and other industries
As dust and sulfur removal for corrosive or high-temperature flue gas.
The FRP dust collector and desulfurizer implements the national
production standards for FRP products.
The dust collector and desulfurizer produced by our company has been tested and can meet the local standards of Beijing
"Boiler Pollutant Emission Standards". The quality inspection of the equipment body is based on the plastic heat resistance (Martin) experimental method, the tensile property method of glass fiber reinforced plastics, the glass fiber bending property experimental method
Product characteristics of FRP dust collector and desulfurizer

FRP desulfurization The dust collector has the characteristics of high temperature resistance
Resistance to acid and alkali corrosion, anti-aging, light weight, high strength, and long service life
The product adopts a split-joint type to facilitate transportation and installation of the dust collector. The main body of the dust collector is made of modified resin with high temperature resistance. composite materials. The main material of ordinary resin composite products, which has poor temperature resistance and is not suitable for dust collectors, is the first of its kind in China. Due to the use of corrosion-resistant materials such as resin composite materials and its high-temperature resistance modification, and the main body of the dust collector using large-scale winding equipment to be molded in one go, the strength of the equipment is greatly increased, making the series of dust collectors and desulfurizers have high Strength, corrosion resistance and other properties, the maintenance rate is almost zero under normal and standardized operation.
We know
The decay coefficient of resin is generally In addition to high temperature resistance and corrosion resistance, a wear-resistant layer is added to the equipment inlet to greatly extend the service life of the dust collector. Its products have a scientific and reasonable split-type design in structure. This novel and exquisite structure facilitates transportation and installation for users, saving manpower, material resources and daily maintenance.

The desulfurization dust collector is equipped with a scientific and unique impeller dehydrator, which effectively saves energy and reduces consumption. It uses the principle of centrifugal force to dehydrate the impeller dehydration equipment without power and energy. There are no moving parts in the equipment, thus improving operational reliability and stability. Reduced losses and maintenance costs.

In addition to the large specific area of indoor liquid-gas contact, the dust collector has the characteristics of high dust removal and desulfurization efficiency. Experiments have proved that the liquid-gas ratio
cubic meters of desulfurization efficiency can reach
or above.

When using working principles such as inertial impact, it saves water pumps and reduces operating costs compared with other dust collectors.

The integrated desulfurization and dust removal equipment consumes little water and can use sodium hydroxide industrial alkaline wastewater or slag water boiler blowdown wastewater as desulfurizer, which not only saves energy but also eliminates secondary pollution. After testing by the National Industrial Products Laboratory, the FRP dust collector and sulfur remover produced by our factory has
acid and alkali resistance, corrosion resistance, high temperature resistance and aging resistance, low operating cost and equipment footprint