SWH-G02-C5-A110-10 Taiwan Northern Precision Solenoid Valve

台湾北部精机Northman：

SWH-G02-C5-A110-10

台湾北部精机Northman：

SWH-G02-C5-A110-10

台湾北部精机Northman：

SWH-G02-C5-A110-10

Structural Principle of Solenoid Valve


This valve cleverly combines the pilot solenoid valve, manual valve and throttle valve into one. The pilot valve receives the electrical signal switch and drives the main valve to act. The adjusting screw can adjust the applicable range of medium viscosity and main valve switching time, and can compensate after the main valve wears. When the pilot valve needs maintenance, it can be removed by tightening the adjusting screw and isolation screw and can be operated with a manual screw. The screw can also be used to preset the maximum or minimum flow rate for automatic control of the solenoid valve.


Selection of solenoid valves

Solenoid valve selection should first follow the four principles of safety, reliability, applicability and economy, and secondly, based on six aspects The on-site working conditions (i.e. pipeline parameters, fluid parameters, pressure parameters, electrical parameters, action modes, special requirements are selected).

Common models of Hobu Seiki solenoid directional valves