- 规格:
- 齐全
- 成分:
- 标准
- 密度:
- 标准
牌号:T3
标准:GB/T 2059-2000
●特性及适用范围:
有较好的导电、导热、耐蚀和加工性能,可以焊接和钎焊。但含降低导电、导热性杂质较多,含氧量较T2更高,更易引起“氢病”,不能在高温(如>370℃)还原性气氛中加工(退火、焊接等)和使用。
●化学成份:
铜+银 Cu+Ag:≥99.70
锡 Sn :≤0.05
铅 Pb:≤0.01
镍 Ni:≤0.2
铁 Fe:≤0.05
锑 Sb :≤0.005
硫 S :≤0.01
砷 As :≤0.01
铋 Bi:≤0.002
氧 O:≤0.1
注:≤0.3(杂质)
●力学性能:
抗拉强度 σb (MPa):≥205
伸长率 δ10 (%):≥30
注 :带材的室温拉伸力学性能
试样尺寸:厚度≥0.3
●热处理规范:热加工温度900~1050℃;退火温度500~700℃;冷作硬化铜的再结晶开始温度200~300℃。
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Shanghai Shenhui supplies pure copper T3 factory direct sales】are provided by member【Shanghai Shenhu Industrial Co
】,By Titker Trade Network members 【Shanghai Shenhu Industrial Co
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!