Haotian 850 color steel tile press

The profiled plates produced by the color steel tile press machine are mainly used for roof production of various industrial plants, warehouses and other roofs. They have the advantages of high peak strength, overlap installation, safe and reliable waterproofing, strong anti-typhoon and anti-riot performance. Detailed introduction
Type color steel tile press
Type color steel tile press technical parameters
Length, width and height
About the weight of the whole machine
Forming shaft diameter and tempering
Forming wheel material is forged and hard chromium plated
Transmission method sprocket chain
Motor forming rows
Fully automatic computer fixed-length cutting system
Pumping station motor
Shearing mold
Forming speed/
Pressing thicknessbr/> Pressing width
Haotian type color steel tile press is mainly composed of forming and cutting after discharging the material. The center lines of the upper and lower rollers should be on the same plane. The center wheel shall be used as the standard on the line. The flatness shall not be greater than the gap between the upper and lower rollers of each row. The gap deviation shall be adjusted with conventional measuring tools or feeler gauges.
When installing each steel plate on the color steel tile press, its edge overlap should be accurately placed on the previous steel plate and clamped with the previous steel plate until both ends of the steel plate are fixed. A simple but effective method is to use a pair of clamping pliers to clamp the overlapping steel plates separately. In the south, color panels are generally designed as single-layer color panels. In order to reduce solar radiation heat from entering the interior of the building, an insulation layer can be installed in the roof system when installing roof panels. A very simple, cost-effective and effective method is to lay a double-sided reflective foil film on the purlins or battens before installing the roofing steel panels. This method also acts as a vapor barrier to reduce condensation.
The profiled plates produced by the color steel tile press machine are mainly used for roof production of various industrial plants, warehouses and other roofs. They have the advantages of high peak strength and high strength. Overlap installation is safe and reliable, and has strong waterproof, anti-typhoon and anti-riot performance. It also solves conventional problems. The roof panel leakage problem of the series of profiled panels can be used with the arching machine to produce a beamless arched roof.
The products produced by the Haotian color steel tile press have smooth appearance, beautiful paint texture, uniform strength, high durability, and are widely used in industrial and civil buildings such as factories, warehouses, garages, hangars, gymnasiums, exhibition halls, theaters, etc., for room surfaces and walls.