Construction dense mesh

Safety net|Building safety net|Safety net wholesale|Safety net manufacturer|Safety net price
Safety net, building safety net, safety net wholesale, safety net manufacturer, safety net price
Dense mesh | Construction dense mesh | Dense mesh wholesale | Dense mesh manufacturer | Dense mesh price
Dense mesh, construction dense mesh, dense mesh wholesale, dense mesh manufacturer, dense mesh Net Price
Category Editor
Building safety nets are divided into vertical building safety nets and flat building safety nets.
The net is a dense-mesh safety net that hangs vertically on the outer layer of the building and is generally green in color.
The net is a mesh-type safety net that is hung horizontally on the bracket and is generally white in color.
Features Usage editor
Features: High strength, light mesh body, heat insulation and ventilation, light transmission, fire protection, dustproof and noise reduction.
Usage Specification Edit
A safety net must be hung below the high-altitude working part. When the height of the building exceeds, a safety net must be set up that gradually rises with the wall, and a fixed safety net must be set up every other time in the future. Safety nets must be installed on the outer frame, bridge frame, and at the upper and lower holes. The erection of the safety net should be low on the inside and high on the outside. The height difference of the outgoing part is generally as long as the left and right support rods are not broken, and the gap between the inner edge of the curved net and the wall is smaller than the distance between the lowest point of the net and the surface of the object below. For supports used in erecting safety nets, the diameter of the small end of wooden poles shall not be smaller than that of bamboo poles, and the spacing between support poles shall not be greater than 1.
. Check the safety net for corrosion and damage before use. During construction, it is necessary to ensure that the safety net is complete and effective, has reasonable support, and is evenly stressed. There should be no debris in the net. The overlap must be tight and secure, with no gaps. The safety net must not be dismantled or damaged during construction. It must be removed only when there is no high place to work. When an erected safety net is temporarily dismantled due to construction needs, the construction unit must notify and obtain the consent of the erection unit before dismantling it. After the construction is completed, it must be restored immediately by the construction unit in accordance with the regulations, and it can only be used after passing the inspection by the erection unit.
. The debris in the net should be cleaned frequently. When welding operations are performed above the net, effective measures should be taken to prevent welding sparks from falling on the net. There should be no long-term and severe acid-base smoke around the net.
Safety nets must be checked frequently when in use, and records of use must be tracked. Safety nets that do not meet the requirements should be dealt with in a timely manner. When the safety net is not in use, it must be properly stored and kept to prevent moisture and mildew. Before using a new net, you must check the nameplate of the product. First, check whether it is a flat net or an upright net. Upright nets and flat nets must be strictly distinguished. Vertical nets are never allowed. When a flat net is used to set up a net, the tether at the bottom must be tied. firm. The manufacturer's production license and product's ex-factory certificate. If the old network is used, it should be tested before use, and a test report must be provided. Only old networks that pass the test can be used.
Installation method editor
When installing a safety net, each rope must be tied to the bracket. The edge of the safety net should be close to the bracket. When tying the knot, try to ensure that the knot is strong and untied. It is not troublesome to open. In order to ensure that the force is not released during work, the safety net with ribs must be connected to the bracket when installing.
The mesh surface should be perpendicular to the horizontal plane, and the maximum gap between it and the working edge should not exceed.
When building a safety flat net, the mesh surface should not be stretched too tight. The distance between the two layers of flat nets should not exceed the minimum distance between the flat net and the surface of the object below.
After the safety net is installed, it must be inspected by the security inspector before it can be used.
Regular inspections of safety nets in use should be carried out, and fallen objects should be cleaned up in a timely manner.
Contact number