Year1
- 表面硬度：
- 莫氏7度
- 抗压强度：
- 77.6MPa
- 耐磨度：
- 2.215cc
Keywords emery wear-resistant floor material, supply of emery wear-resistant material, price of one ton of emery wear-resistant material, emery construction technology
Us We may all have a rough understanding of the construction process of emery wear-resistant flooring (contact person Jiao Yan), but if we were asked to do it ourselves, we might not be able to do it. It seems to be a very simple process, but if we are not professionals, we can barely do it. It can be done, but it will be full of problems. Below, the editor will explain the construction process to you. (Supply of emery wear-resistant floor material Jiao Yan)
1. The first step in the construction of emery wear-resistant floor is to remove the laitance. After the concrete base is flattened, the initial setting begins. When people step on it, it will sink (about ~ hours, depending on the temperature). Use a mechanical trowel equipped with a disc to vibrate and lift the slurry. Where the machine cannot grind, use a trowel to smooth it manually.
2. Spread the material. When the material is spread for the first time, when the wear-resistant material has fully absorbed the water and the color becomes darker, use a mechanical trowel equipped with a disc to polish and extract the slurry. When polishing, pay attention to crisscrossing. Approximately intervals, Spread the remaining materials evenly, polish and extract the slurry, and make a criss-cross pattern when polishing. (Supply of emery wear-resistant floor material Jiaoyan)
3. Finish. After the slurry is extracted, use a machine that removes the disc about 100 meters or so. Use a trowel to collect the light. When the temperature is low, the light should be collected when the ground moisture is low.
4. Apply curing agent. Apply curing agent after the emery wear-resistant floor is formed. (If If the maintenance is not timely, if watering or special curing agent is not applied in time, the water will evaporate violently, and cracks will appear on the ground.)
5. Cut expansion joints. Cut expansion joints in the sky.
About emery wear-resistant flooring There are so many construction techniques. If your floor area is too small for professionals to construct, we can provide you with corresponding construction plans and videos. Although we sell materials, we pay more attention to the quality of the floor. and effect. If you still have any questions, please call me and I will serve you online 24/7!
Contact Manager Jiao
Mobile phone number
Contact address No. Tuanjie Road, Jinan Economic Development Zone, Jinan, Shandong
Steply also has a WeChat public account. Please search for the official account of Steply Voice, or search for WeChat ID, or scan the QR code below to follow and obtain the latest knowledge and information in the flooring industry. Welcome everyone to pay attention!![!]![]
\\\\\\\How to construct the emery wear-resistant floor in the south factory
WhatsApp
