Detailed description of silicon PU court construction technology

1
Silicon court
Construction of elastic layer
Silicon court
Before applying the coating, check to confirm that the basic treatment meets the construction requirements. Before construction, a certain amount of water must be added according to the proportion of the material. Each bucket of material (kg) needs to be added with grams of water and then mixed evenly with an electric mixer (approximately 1 minute) before use. When adding water, you can use the measuring cup provided by our company to weigh it. Materials that have been added with water must be used up within hours. Materials that have been opened must be used up within the same day.
The buffer layer is constructed by thin coating and multiple passes, which can not only ensure quality but also save materials.
Silicon court
During construction, use a toothed trowel to scrape the buffer layer material on the base surface. The thickness of each scraping should not exceed the time interval between each scraping. The time interval for each scraping shall be based on the drying of the previous one (generally about approx. The specific hours will depend on the weather conditions on site until the required thickness is reached. Pay attention to the leveling effect when scraping. If the scraping marks cannot be leveled, special diluent must be added to adjust the consistency to ensure surface leveling. After the buffer layer is dry, use accumulated water Method to test the surface flatness. Use buffer layer material to repair and smooth the water-accumulated areas. If the granular debris is mixed or accumulated on the surface, it needs to be smoothed with a grinder before proceeding to the next process.
The construction of the second stable layer shall be completed after the buffer layer material has dried. The reinforcing layer material must be constructed in time to ensure that the two layers of materials are firmly bonded. The construction method of the reinforcing layer material is the same as that of the buffer layer. After drying, the surface must be flat and smooth. If debris is mixed during the construction of the
Silicon Court
Or the uneven areas need to be trimmed and smoothed before the next process can be carried out.
Three
Silica ball surface layer
Two passes of construction
First pass
Silicon ball surface
The paint is a two-component material consisting of a component curing agent and a component color paint. The ratio is (curing agent): (color paint): (weight ratio). Mix the two materials evenly and then add special anti-slip powder (add The total amount is equal to the total weight. Stir the materials thoroughly and apply with a roller. The second application is the same as above but the amount of anti-slip powder added is halved, that is, anti-slip powder is added for each kilogram of topcoat. Note that each application of topcoat must wait for the first time. The topcoat can be marked after it has dried.
Four
Silicone courts
Line marking
The line can be marked after the topcoat layer is cured. The marking paint material is a two-component material. The components are curing agent and white color paste (weight ratio). Before construction, they need to be mixed in proportion and stirred evenly before use.
During construction, mark the boundary line position with texture according to the specifications and size standards of the golf course. Paste the paper along both sides of the boundary line. Use a small oil brush to directly apply the marking paint on the surface of the silicon ball to the area to be marked. Once the surface is dry, tear off the masking paper.
Guan Aotong is here The sports venue construction industry has gone through seventeen years of undertaking professional indoor sports venue construction projects across the country. More than 100 professional construction teams and excellent construction technology can provide one-stop solutions for your silicon stadium construction. Sports ground solutions.
Guanaotong, the first brand of sports venue construction in China, offers free consultation nationwide or you are welcome to contact Ms. Wang for consultation and business negotiation.
Address: Floor, Jialin Haoting, No. Shennan Avenue, Futian District, Shenzhen