Product Details
Acrylic court
It is divided into elastic acrylic court and hard acrylic court. The difference between them is that the elastic acrylic court has an elastic layer material added to it. In terms of construction cost, the construction cost of elastic acrylic courts is higher than that of hard acrylic courts, and the price is similar to the surface construction cost of silicon basketball courts.
Why is the construction price of elastic acrylic court
higher than that of hard acrylic court? You will understand after looking at the construction process.
, cutting words Seam: Cut the temperature seam into a square no larger than the original plate. The temperature seam should be cut between the original plates. The temperature seam should be wide and deep (cut into font-shaped grooves on the temperature seam and irregular seam).
, Acrylic court
Basic pickling: (or polishing) moisten the ground with clean water, clean the ground with left and right dilute hydrochloric acid, and then rinse with clean water.
Treatment of damaged and uneven ground: Use sand/cement to repair the damaged areas.
Primer: The primer is evenly rolled on the base surface. The amount depends on the firmness of the field. The general amount is about ./. After it dries, the next step of construction can be carried out.
Caulking: After the primer has solidified, use compressible foam to gently squeeze into the temperature gap. Be sure to fill the temperature gap without protruding.
. Replenish accumulated water: Use elastic layer material and add: fine sand (mesh)/cement (number): Stir evenly and level the water accumulation area. After leveling, it is required that the accumulated water should not exceed 10 minutes after rain. To be qualified.
. Scrape the elastic layer: use the elastic layer material: special powder: . (water can be added to adjust the construction consistency), scrape it on the base surface with a flat scraper, and the thickness of each scraping coat cannot exceed, The time interval between each scraping coat shall be based on the previous coat drying (generally about an hour, depending on the weather conditions on site) until the required thickness is achieved.
After the elastic layer is dry and solid, use the water accumulation method to test the flatness of the ground. The water accumulation area needs to be filled with elastic layer material and powder. Use a grinder to trim the rough surface part and then apply scraping to strengthen it. layer.
After the temperature seams and irregular seams are reprocessed, mix the caulking glue in proportion and apply it to the seams in two to three times.
, Scratch reinforcement layer: use reinforcement layer material: special powder:. (You can add water to adjust the construction consistency) Apply two coats with a flat scraper. The surface after scraping must be flat and smooth.
. Scratching surface layer: According to the color. Topcoat: Special sand:. Mix thoroughly and stir evenly. Apply on the reinforced surface. Generally, two coats of scraping are applied (no sand is added for the second time, and the general amount is about for./).
, marking the acrylic court
: Measure and position according to the standard size, mark the position of the line with a canvas line, and then use textured paper to stick it on the court along the canvas line, and use a center star Brush the special marking paint evenly between the two textured papers with a brush. After the paint is dry, tear off the textured paper.
, elastic acrylic court
The construction is completed and the final completion and clearance work is carried out.
Guanaotong has entered the sports venue construction industry since 2001. It has experienced seventeen years of domestic sports venue construction from its inception to development and growth. In the past seventeen years, Guanaotong's sports venue construction team has traveled all over the world. Across the country, more than a thousand sports venue construction experiences and a professional technical team can provide you with a one-stop construction solution for your elastic acrylic court.
Guanaotong is the first brand of sports venue construction in China, with a nationwide toll-free consultation hotline: > Or call Ms. Wang, welcome to call us to discuss business.
Address: Floor C, Jialin Haoting, No. Shennan Avenue, Futian District, Shenzhen
For more services, please visit the following website:>
Sports wooden flooring: >:..c/
Leisure chairs, garden chairs: >:..c/
Sports wooden flooring: >:. cc/
Landscape boat:>:.cc/
Sports wooden floor price:>:.bc/
Silicon>Court:
>:.cc/
Acrylic court:>:.bc.c/
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【The basic process of elastic acrylic court construction is professionally operated by Guanaotong】are provided by member【Shenzhen Guanaotong Health Industry Co., Ltd.
】,By Titker Trade Network members 【Shenzhen Guanaotong Health Industry Co., Ltd.
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!