- 规格:
- 齐全
- 成分:
- 标准
- 密度:
- 标准
化学成分及特性:
主要成分Cu 57.5-59.5 Pb2.0-2.8 Zn余量 杂质成分 % Fe≤0.5 Ni-- 杂质总和%≤1.2
特性硬度、强度好,铅粒分布均匀,长期使用不翘曲。应用广泛
铅黄铜:性质:在铜锌合金基础上,加入铅的黄铜。按含锌量可分为单相α铅黄铜,两相(α+β)铅黄铜。单相α铅黄铜只能冷轧和热挤,常用的有63Cu-34Zn-3Pb合金,软态的拉伸强度达350MPa,延伸率为45%。具有较高的强度和良好的冷加工性能,有极好的切削性,主要用于仪表和其他机械式仪表上要求切削性极高的零件。两相(α+β)铅黄铜可进行热轧、热挤和冷加工,典型的合金为59Cu-40Zn-1Pb,在550~650℃温度区间具有超塑性,有较高的强度和优良的切削性能,软态的拉伸强度为420MPa,延伸率为45%,是最经济、最常用的铅黄铜。
用于制作热矿井和切削加工的零件、螺钉、垫圈、衬套、螺帽、底座、轴承保持器
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Shanghai Shenhui supplies lead brass HPb59-2 copper plates, rods, copper strips, etc.】are provided by member【Shanghai Shenhu Industrial Co
】,By Titker Trade Network members 【Shanghai Shenhu Industrial Co
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!