Anbo spare parts

Anbo Spare Parts
Liter Brake
) Dual disc, electromagnetic self-adjusting brake, automatic compensation for brake pad wear.
)The service life of the brake pads should not be less than 10,000 times under normal use. Emergency braking is no less than 2 times
) Maintenance-free, no adjustment and maintenance required.
) Normally closed design, the lifting mechanism is in braking state when the power is cut off to ensure safety.
) Environmentally friendly brake pads are dust-proof and asbestos-free,
and have a high degree of safety and reliability.
) The friction contact area is large, the braking torque is adjustable, and the heat dissipation performance is good.
Lift limit switch
) Cam rotary limit switch.
) fully adjustable upper and lower limit positions.
)Precise phase sequence control.
) first decelerate and then stop.
)Deceleration operation improves brake life and safety.
Barrel
) is designed and manufactured using the finite element method.
) Extend the life of the wire rope and reduce the deviation of heavy objects.
) The wire rope is fixed with a clamp, and at least one loop of wire
is fixed.
)Heavy grade permanently lubricated bearings.
) is made of seamless steel pipes and machined with rope grooves.
Rope device
) has the advantages of maintenance-free and easy installation and disassembly.
)The rope guide is made of special engineering
plastic that is wear-resistant and has low friction coefficient, and has high reliability.
It has little wear on the wire rope, long life, good toughness and elasticity.
Wire rope
) uses high-strength galvanized special steel wire rope, combined with wear-resistant wire rope drum and roller, which is durable.
)Multiple strands are twisted and hinged for fastening.
) has strong wear resistance and corrosion resistance.
Pulley block
) The outlet of the wire rope is equipped with a wear-resistant rubber protective sheath to prevent friction between the wire rope and the metal shell.
)The hook and pulley are made of high-strength nickel-chromium alloy forging.
) uses anti-wear roller bearings.
)The hook can be rotated.
) Equipped with a spring-pressed safety buckle to prevent slipping.
Line motor
) has a cylindrical solid rotor, large moment of inertia, and soft-start function.
) Squirrel-cage, double-winding pole-changing speed-regulating motor with built-in brake, stable power output and good thermal load performance, suitable for frequent starting conditions.
)Protection level, grade insulation.
) Power continuity rate.
) Built-in thermistor overheating protection, optimized air-cooling type.

Position switch
) restricts the movement of the large car and the small car, so that the large and small cars automatically decelerate and stop when they approach the end of the track.
) is suitable for situations where the trolley on the crane needs to be turned in certain prohibited areas.
)Deceleration operation improves brake life and safety.
) Trigger stop bars are installed at both ends of the walking direction.
) has automatic reset function.
)Limit switch protection level.


Electric anti-collision switch
To avoid collisions between cranes working on the same track, this switch will activate when the two cranes move toward each other and reach a given photoelectric reflection distance. Works automatically, reducing its speed. Under special requirements, it can also further change the crane's traveling motion from slow speed to stop. According to the actual situation and requirements, the photoelectric reflection distance of the switch can be adjusted (optional).
Bo Load Monitor
It has a series of switches and monitoring devices that can measure whether the weight on the hook exceeds the rated lifting capacity in a few hundredths of a second, effectively acting as an overload monitor. Protective effects.
) has overload protection function.
)The operating time meter can accumulate the number of starts and the accumulated working time.
) Calculate the remaining safe working cycle of the hoisting mechanism.
)Main fault and power diagnosis.
)Motor protection real-time monitoring.
) Load display (option).
) Load quantity record (option).
) Cut off the motor and use it as a generator to reduce brake wear.
) has the functions of motor overheating and brake pad wear alarm.
) is equipped with other security function interfaces.
Bo Synchronous Operation Electronic Control System
) This system allows the operator to control multiple hoists to move together, that is, run, lift and lower at the same time. During the lifting process, the system can adjust and compensate the lifting speed of each hoist to achieve simultaneous lifting. There is no need to turn off one of the motors to adjust the speed.
) The rotary switch can also be used to operate, lift and lower separately.
) Anbo electronic control system can ensure that the lifting and
trolley motors start smoothly and accelerate evenly to the design speed.
) Anbo’s patented product delay switch can ensure that the motor
decelerates smoothly and reduces the shaking of the hanging object during deceleration and braking.
)The electronic control system and the delay switch are used in conjunction to achieve the best working results.
Bo motor protection components
Anbo motor overload protection is used for electric traveling of cranes.
Electric traveling trolleys and trolleys are equipped with motor overload protection switches. When the motor is overheated, running out of phase, frequently inching, or the motor is overloaded due to gearbox failure, the circuit can be automatically cut off to effectively protect the motor from damage. Restarting the motor does not require replacing the fuse.
Bo Electrical Connection Standard Components
Make the connection convenient and reliable. All standard connection components are pre-installed, which greatly reduces the number of repairs and maintenance required in the future. The hoisting, reduction motor, and control unit can be connected simply and quickly without the assistance of electrical personnel.
Bo Hand Switch Door
) is ergonomically designed.
) Its angular structure is convenient for people to hold naturally and has the characteristics of impact resistance, corrosion resistance and weather resistance.
) protection level.
) Built-in suspension with soft thin steel wire or wrapped with high-strength fiber
to ensure that the cable is not stressed.
Bodian control box