Sheet metal welding

规格：

1000x1500m

型号：

D16/D28

编号：

D28-C03A

Basic requirements for fixture design
The tooling fixture should have sufficient strength and stiffness. When the fixture is put into use in production, it must withstand a variety of forces, so the tooling fixture should have sufficient strength and stiffness.
, clamping reliability. When clamping, the positioning position of the workpiece must not be damaged and the shape and size of the product must comply with the drawing requirements. It neither allows the workpiece to loosen or slip, nor makes the workpiece too constrained to produce large constraint stress.
, Flexibility of welding operations. The use of fixtures for production should ensure sufficient space for assembly and welding, so that operators have a good vision and operating environment, so that the entire process of welding production is in a stable working condition
and facilitates the loading and unloading of weldments. During operation, it should be considered that the product can be smoothly removed from the fixture after assembly, positioning welding or welding, and that the product is not damaged during flipping or lifting.
), good workmanship. The designed fixture should be easy to manufacture, install and operate, and easy to inspect, repair and replace wearing parts. When designing, factors such as the existing clamping power source, hoisting capacity and installation site of the workshop should also be considered to reduce the manufacturing cost of the fixture