irradiation cable

Irradiation cross-linked polyethylene insulated power cable
Irradiation cross-linked polyethylene insulated power cable is suitable for AC rated voltage power transmission and distribution network systems.
The performance of this power cable complies with national standards.
The maximum allowable long-term operating temperature of wire conductors is ℃.
The maximum temperature when the wire conductor is short-circuited is ℃ (the longest duration shall not exceed)
The allowable bending radius of the wire conductor is not greater than (which is the outer diameter of the cable)
The temperature of wire laying is not lower than ℃.
Technical characteristics of irradiation cross-linked polyethylene insulated power cable
Irradiation cable adopts high-tech electronic irradiation technology, which is physical cross-linking. It has the following technical characteristics
The cross-linking process does not require heating. Or add water, the cross-linking reaction does not produce water and gas, so there will be no water, branches or other aging that affects the life span in long-term use
Irradiation cross-linking is carried out at normal temperature without high temperature (about ℃) and high pressure (Right, therefore, the internal structure of the wire is stable
Because no chemical substances such as cross-linking agents are used, there is no residue after cross-linking, and the cable has excellent dielectric properties, no odor, and no pollution