Type 850 color steel tile press

Technical parameters of color steel tile press
Length, width and height
About the weight of the whole machine
Forming shaft diameter quenching and tempering
Forming wheel material is forged and plated with hard chromium
Transmission method sprocket chain
Motor forming rows
Fully automatic computer fixed-length cutting system
Pumping station motor
Shearing mold
Molding speed/
Pressing thicknessbr/> Pressing width
Haotian type color steel tile press is mainly composed of unloading and forming and then forming and cutting. The center lines of the upper and lower rollers should be on the same plane, based on the center wheel, the flatness No larger than, the gap between the upper and lower rollers in each row is equal, and the gap deviation + is debugged with conventional measuring tools or feeler gauges.
When installing each steel plate on the color steel tile press, its edge overlap should be accurately placed on the previous steel plate and clamped with the previous steel plate until both ends of the steel plate are fixed. A simple but effective method is to use a pair of clamping pliers to clamp the overlapping steel plates separately. In the south, color panels are generally designed as single-layer color panels. In order to reduce solar radiation heat from entering the building, when installing roof panels, an insulation layer can be installed in the roof system. A very simple, cost-effective and effective method is to lay a double-sided reflective foil film on the purlins or battens before installing the roofing steel panels. This method also acts as a vapor barrier to reduce condensation.
The profiled plates produced by the color steel tile press machine are mainly used for the roofing production of various industrial plants, warehouses and other buildings. They have the advantages of high peak strength, safe and reliable overlap installation, and strong waterproof, anti-typhoon and anti-riot performance. It also solves the roof panel leakage problem of the conventional series of profiled panels, and can be used with the arching machine to produce beamless arched roofs.
The products produced by the Haotian color steel tile press have smooth, beautiful appearance, uniform paint texture, high strength, and durability. They are widely used in industrial and civil buildings, such as factories, warehouses, engine garages, hangars, gymnasiums, exhibition halls, theaters, etc., for room surfaces and walls.