Cangzhou steel and wood square steel and wood keel manufacturer 18132292622

规格：

齐全

The secondary rails of the wall formwork in the new assembled formwork are made of steel and wood products, using a thin-walled steel structure with high strength and light weight. Used as the vertical columns of the formwork, they are in direct contact with the formwork. After the vertical wall formwork panels are installed, they can be arranged vertically and in parallel at a certain distance. It plays the role of template supporting skeleton. Suitable for wall column top plates instead of wooden squares. In traditional construction technology, the secondary corrugation in the building formwork support system is a wooden square structure. First of all, because it is a fixed-size product, it is not designed to be modular according to the building. The building elevations are varied, so it needs to be cut off during the construction process. This cutting process will inevitably cause waste. And the wood can only be cut shorter and shorter. Secondly, because the traditional process is a combination of wooden squares and steel pipes, the strength of the materials varies, which may cause mold running problems due to the deformation of the wooden squares. Thirdly, since concrete pouring is a wet process, the wood will be damp and deformed. As the number of uses increases, the deformation will become greater, leading to the problem that as the floors increase during the construction process, the construction quality becomes worse and worse. . The secondary rails of the wall formwork in the new assembled formwork are made of steel products. They are produced in the form of thin-walled steel-clad wood and are processed by steel-clad wood equipment. They are strong and light in weight. Because they contain wood, they achieve the use effect of wood and increase the number of uses. the intensity. Used as the vertical columns of the formwork, they are in direct contact with the formwork. After the vertical wall formwork panels are installed, they can be arranged vertically and in parallel at a certain distance. It plays the role of template supporting skeleton. Since the profiled steel contains wood and has been processed by technology, the top plate can still function as wood (any nails can be driven) regardless of the internal angles of the formwork joints. The secondary bar body is drilled with a round hole that penetrates the bar body, so that the secondary bar can be connected to the formwork through nails, which facilitates workers' individual operations and lifting requirements during construction. The size is larger than that of wooden standard, and the strength is higher, which greatly improves the quality of concrete forming. It fully meets the requirements of fair-faced concrete. In order to meet the versatility of frame column wall tops, there are eight secondary bar sizes. Any floor, any size, no need to change dimensions. To achieve true versatility and modularization, customers are welcome to call us for consultation. Contact Manager Gao