Submarine cable recycling granulator | Submarine cable recycling granulator | Cross-linked submarine cable granulator

Submarine cable recycling granulator
|
Submarine cable recycling granulator
|
Cross-linked submarine cable granulator
Submarine cable granulator water-stretched strip making machine Granulator
Water Stretch Granulator,
Use Scope
Plastic (Polystyrene) English Name
Plastic (Acrylonitrile Butadiene Styrene)
Plastic Polyoxymethylene) English name
Plastic (polypropylene) English name
Plastic (polyphenylene ether) English name ( )
Plastic (polyethylene) English name
Polyvinyl chloride English name ( )
Plastic (nylon) (polyamide) English name
Plastic (polycarbonate) English name
Plastic (polysulfone) English name
Plastic (polytetrafluoroethylene) English name
Plastic (polyphenylene sulfide) English name
) Glass fiber system, the temperature is too low, the resin is half-melted, and the glass fiber coating in the later section is poor. The temperature is too high, the resin flow increases, and the temperature is tempered The shearing effect becomes smaller, and even high-temperature degradation occurs. The setting principle
depends on the base material and the glass fiber content
. After deducting the heat input from the screw shear, it is slightly higher than the melting point range of the base material. Melt flow conditions in the inner and rear section of the melting section (i.e., the glass fiber inlet).
) Glass fiber reinforced flame retardant system, the set temperature is between the previous two, based on the basic melting point of the material.
) Filling system, (providing strong shear to fully disperse the filler and the melting section is ~°C higher than the melting point of the base material (as high as possible to fully melt the material and distribute it evenly.
) Flame retardant system, (well protected) The temperature of the flame retardant should be low, especially for white materials, as low as possible.
) Alloy system, based on two sets of melting temperatures, taking into account the proportion of components and the thermal sensitivity of the components, etc., adjust the temperature appropriately< br/> For example, the melting point is about 10 degrees, the decomposition point is about 10 degrees, the decomposition point is about 10 degrees, so the processing temperature should take other additives, such as compatibilizers, lubricants’ thermal stability, etc. into consideration
Water Stretch Granulator Technology
High Mixer Spiral Automatic Feeder Twin-Screw Granulator Cooling Water Tank Blow Dryer Granulator
Welcome to Consult
Water Stretch Granulator Strip granulator