The first brand in the printing industry for electrostatic flocking pulp/suede pulp/flocking printing

Dry-free and anti-scratch
Flocking pulp instruction manual
Contact Miss Zhou
Applicable industries
Suitable for high elastic cotton non-woven fabric Oxford cloth carded fabric swimsuit Electrostatic flocking of stretch fabric nylon fabric sweater leather.
Appearance and composition
Translucent viscous slurry is a high molecular polymer adhesive.
Characteristics
>Application process
>
Printed flocking pulp, flocked and dried to absorb excess fluff finished product
>Application reference

Planting Fluff pulp

Curing agent

Color paste
~
Note that the proportion of curing agent must be weighed accurately. If the added amount is not enough, the firmness will deviate. It can withstand high-temperature washing for an hour after printing. If the slurry cannot be dried in humid weather, please use ~overheating~minutes.

>
>Troubleshooting
>Poor firmness may be caused by
>
Insufficient amount of curing agent added
>The answer is that the ratio of quasi-curing agent is enough
>
The paste layer is not thick enough
>
The answer is that the strength of the printing paste can be adjusted appropriately to control the thickness of the printed paste layer as much as possible. More than 1 meter
>
The weather is humid and the pulp surface is not fully dry
>
Bake at a certain temperature for ~ minutes.
>
Flocking should be done only after the surface of the printed slurry layer has begun to dry
>
Answer: If the slurry surface has begun to dry, the fluff cannot be implanted deep into the slurry layer, so it should be Try to shorten the time you wait for flocking after printing as much as possible
>
Poor quality of fluff
>
Answer: Because fluff needs surface treatment to produce an electric field in static electricity, The fluff of poor quality cannot fully generate an electric field with static electricity and cannot be inserted deep into the pulp layer
>
The power of the electrostatic flocking machine is too small
>
Answer: Because of electrostatic flocking The power of the machine is too small, and the fluff beats with relatively little force under the action of static electricity, so the fluff cannot be implanted deep into the pulp layer
Stored at room temperature, the shelf life is one month.
Flocking pulp/electrostatic flocking pulp/dry-free flocking pulp/hair flocking pulp/electrostatic flocking pulp/velvet pulp/flocking printing
Flock pulp/anti-scratch soft water-based flocking pulp/flocking The only partner in the craft industry, Shanghai World Expo partner, the first brand in the printing industry, Guangyin Brand