thermostat

The thermostat adopts large-screen digital display control technology (
blue backlight
detects the indoor temperature
through the
temperature sensor inside the thermostat and communicates with the user in real time Compare the set temperatures
Automatically adjust the fan and valve switches
Finally achieve the purpose of maintaining a constant indoor temperature.
Two technical parameters
Power supply
,
Timing Error
Valve load current
Accuracy
℃
Temperature setting range
℃
℃
Power consumption
Fan output control ~
Input
Temperature sensing element
Three usage methods
Shut down
When the power is on
Please press the on/off key.
Operating mode
Please press the mode button to switch between cooling and heating manual (ventilation mode)
and other working modes.
Degree setting
Please press the plus or minus key to adjust the temperature
The temperature can be set to
℃
.
Speed setting
Press the setting button
to select the wind speed (
Ultra low) (
Low )
(
Medium)
(
High)
(
Extra high)
(
Auto)
.
When the wind speed is in automatic operation mode
If
the indoor temperature
differs from the
set temperature
by more than
°C
the fan Run ultra-high wind speed
If the difference is
℃~
℃

The thermostat selects the fan to run at high wind speed
If the difference is
℃ ~
℃

The fan will run at low wind speed
If the difference is
℃~
℃

The fan will run at low wind speed Operation
If the difference is
℃~
℃

The fan will run at ultra-low speed
When the room temperature is the same as the set temperature
The valve closes
At the same time, the fan is turned off (
Whether the fan is controlled or not is optional)
.
Single mode
Press the mode switch button
Seconds
Temperature control The device enters the menu selection mode
Continuously pressing the mode switch key can realize the value on the lower side of the screen to switch between
Numeric value
Temperature correction interface
Press the plus or minus key Key to adjust the temperature correction value
The default value is
.
Value
Fan controllable and uncontrollable setting interface
means the fan is controllable
means the fan is uncontrollable .Press the plus or minus key
to switch between
and

The default is
.
Numeric value
Unit model and static pressure selection
First press the plus or minus key to select the unit model, and then press the setting key to switch to static pressure.
Note that after setting, wait
seconds to automatically return to the main interface.
Four Installation Precautions
Remember to turn off the power before installation.
Find a place indoors where the temperature is stable
and not near the entrance or air conditioning unit.
Before you install
You must check the system circuit diagram
Connect the circuit according to the wiring diagram.
Use according to detailed current instructions
Overloading is prohibited.
Five wiring diagrams
Fan output voltage setting method
Press and hold the setting button for more than
seconds, and the setting interface will automatically pop up. Use the up and down keys to adjust the voltage output. If
is displayed, it means that the actual voltage is
br/>. Then press and release the setting key to switch the fan combination. A total of
combinations. Press and hold the up and down keys to achieve
quick setting of steps.