Liaoning vitrified microbead thermal insulation mortar special rubber powder manufacturer

Scope of application of Liaoning vitrified microbead thermal insulation mortar special rubber powder manufacturer
Suitable for exterior wall composite insulation of various brick-concrete structural frames and shear wall structure buildings and fireproof insulation of public facilities such as basements, garages, stairs, corridors, etc.
Construction environment
The construction environment temperature is ℃ ~ ℃. It is not suitable for construction under sunlight or on windy and rainy days.
Ingredients
Ash material and water (mass ratio: wet mortar should not be stirred too thinly. Stir evenly with a mixer and let it sit for a few minutes, then stir again before use.
Precautions
When preparing the slurry, only add water and do not add other aggregates, sand additives, etc. The prepared slurry should be used up within hours.
Construction method
Apply the first layer on a clean wall The thickness of the thermal insulation mortar should not be less than 100%, and after drying, it can be plastered to the specified thickness as required. If the plastering thickness is greater than 10%, the plastering can be divided into two times, with a time interval of more than 1 hour.
The thermal insulation construction technology under the material is in the thermal insulation After the insulation layer hardens, apply a layer of anti-crack mortar on its surface with a thickness of Use anchor nails to fix the steel mesh to the main wall, then apply a layer of anti-cracking mortar, wait for it to dry and then lay the ceramic tiles.